Quick start guide for the Ubiquiti EdgeRouter X ER-X gigabit router covering package contents, hardware overview, PoE passthrough, setup, and specifications.
The Ubiquiti EdgeRouter X (model ER-X) is an advanced gigabit Ethernet router. This Quick Start Guide covers package contents, installation requirements, hardware overview, port descriptions, and reset methods.
It explains powering the router with the included 12V, 0.5A power adapter or 24V passive PoE on eth0/PoE In, passive PoE passthrough on eth4/PoE Out, accessing the EdgeOS configuration interface through DHCP or a static IP address, and the product specifications. Warranty terms are included.
| Dimensions | 110 x 75 x 22 mm (4.33 x 2.95 x 0.87") |
|---|---|
| Weight | 175g (6.17 oz) |
| Max. Power Consumption | 5W |
| Power Input | 12VDC, 0.5A Power Adapter (Included) or 24V Passive PoE Power Supply |
| Supported Voltage Range | 9 to 30VDC |
| Processor | Dual-Core 880 MHz, MIPS1004Kc |
| System Memory | 256 MB DDR3 RAM |
| Code Storage | 256 MB NAND |
| Operating Temperature | -10 to 45° C (14 to 113° F) |
| Operating Humidity | 10 to 90% Noncondensing |
| Certifications | CE, FCC, IC |
The package contents are the EdgeRouter X and a 12V, 0.5A power adapter.
Press and hold the Reset button for about 10 seconds during runtime until the eth4 LED flashes and then becomes solidly lit, or perform a power-on reset while reconnecting power.
eth0 is assigned a static IP address of 192.168.1.1.
Enter ubnt in both the Username and Password fields.