The document provides contact information for various Delta Electronics subsidiaries and offices. It includes contact addresses and telephone numbers for Taiwan, China, Japan, Korea, Singapore, India, the United States, and Brazil.
This document serves as the user manual for the Delta CP2000 Series Intelligent Sensorless Vector Control Drive. It provides comprehensive guidance on the installation, unpacking, and wiring procedures for the AC motor drive. The manual includes detailed safety precautions, such as disconnecting AC input power before wiring and using anti-static measures for sensitive MOS components.
The guide covers main circuit terminals, control terminals, and optional accessories, along with specific dimensions for different frames (A through H). It also details the specifications of the main circuit terminals, including wire gauge requirements and torque settings for various models. Additionally, the manual explains the application of the CP2000 series, warning codes, fault codes, and CANopen overview. This manual is written in Chinese.
| Frame A Screw Torque | 8 ~10kg-cm(6.9-8.7 lb -in.) |
|---|---|
| Frame B Screw Torque | M5 35kg-cm (30.4 lb-in.) (3.434Nm) |
| Frame C Screw Torque | M5 35kg-cm (30.4 lb-in.) (3.434Nm) |
| UL Wire Requirement | 600V, 75 ℃ or 90℃ wire |
AC input power must be disconnected before any wiring is made, and anti-static measures should be taken before touching internal components.
It is recommended to charge the driver stored in no charge condition every 2 years for 3~4 hours.
Do not use steamed smoking sterilization; instead, leave the packaging materials in an environment of over 56 ℃ for 30 minutes.