Key facts
Start here

Dell PowerEdge 600SC Systems User's Guide
Dell PowerEdge 600SC Systems User's Guide provides a system overview and instructions for using the Dell OpenManage Server Assistant CD and the System Setup Program. It also documents technical specifications, I/O ports and connectors, and includes a glossary.
The guide lists hardware specifications such as microprocessor, memory, drives, ports, power, physical dimensions, and environmental limits, plus pin assignments for serial, parallel, keyboard, and mouse connectors.
Dell PowerEdge 600SC specifications
| Processor | Intel Pentium 4 at 2 GHz minimum or Intel Pentium 4 Celeron at 1.7 GHz minimum |
|---|---|
| Front-side bus speed | At least 400 MHz |
| Internal cache | 512 KB level 2 cache (Pentium 4) or 128 KB (Celeron) |
| Memory architecture | DDR ECC SDRAM PC-200, 72 bits |
| Memory capacity | Minimum 128 MB, maximum 4 GB, four module sockets |
| Expansion slots | Four 64-bit 33 MHz slots and one 32-bit 33 MHz slot |
| Hard drives | Four 1-inch IDE or SCSI hard drives |
| Video controller | ATI RAGE XL with VGA connector, 8 MB video memory |
| Power supply | 250 W DC, 90–240 V, 47/63 Hz |
| Dimensions and weight | 43.1 cm high, 20.3 cm wide, 49.5 cm deep, 16.8 kg at maximum configuration |
| Operating temperature | 10 to 35 °C |
| System battery | 3.0 V lithium CR2032 coin-cell battery |
All Dell PowerEdge 600SC documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How much memory does the Dell PowerEdge 600SC support?
The system has four memory module sockets and supports a minimum of 128 MB and a maximum of 4 GB, using 128 MB, 256 MB, 512 MB or 1 GB modules.
What is the default designation of the integrated serial connector?
The integrated serial connector defaults to COM1; if an expansion card uses COM1, the system automatically remaps the integrated connector to COM3.
What is the default designation of the integrated serial connector?
COM1.
What is the default designation of the integrated parallel connector?
LPT1.
