This manual provides detailed information on the installation, configuration, wiring, operation, debugging and maintenance of ASDA-A2 series AC servo drives and ECMA series AC servo motors.
This user manual covers the Delta ASDA-A2 series AC servo drives and ECMA series AC servo motors. It explains installation, configuration and wiring, trial run steps, control functions, parameter settings, communication protocol, inspection and maintenance, troubleshooting, and application examples.
The manual describes the ASDA-A2 series drives as high-resolution, open type servo drives intended to drive three-phase permanent magnet synchronous motors (PMSM). It includes safety precautions and notes that the drives and motors should be installed in a suitable enclosure.
| Drive type | High-resolution, open type servo drive |
|---|---|
| Motor type | Three-phase permanent magnet synchronous motor (PMSM) |
| Maximum command input cable length | 3 m (9.84 ft.) |
| Maximum encoder feedback cable length | 20 m (65.62 ft.) |
| Ground resistance | ≤ 100 Ω |
The manual covers ASDA-A2 series AC servo drives and ECMA series AC servo motors.
Wait at least 10 minutes after power has been removed before touching drive or motor terminals or performing wiring or inspection.
No. Do not connect a commercial power supply to the U, V, W terminals of the motor, as this can damage the servo motor or drive.
Check that the product matches the ordered part number, that the motor shaft rotates freely, for damage, and for loose screws.