SMC ZSE20(F)/ISE20 High Precision Digital Pressure Switch Instruction Manual

This manual introduces the use, safety and other information of the ZSE20(F) / ISE20 high precision digital pressure switch.


SMC ZSE20(F)/ISE20 High Precision Digital Pressure Switch Instruction Manual - cover page
Brand
SMC
Category
sensor
Document type
User Manual
Language
Spanish
Pages
3
File format
PDF
File size
757 KB
Published
02 November, 2023
Updated
02 November, 2023
MD5 checksum
1D434DDB61AAE7B85396E258CE45D259

About this manual

This document is the instruction manual for the SMC ZSE20(F)/ISE20 high precision digital pressure switch. It states that the intended use is to measure, monitor and display pressure and provide an output signal.

The manual includes safety standards, general and connection specifications, cable specifications, part names and functions, and installation and mounting instructions. This manual is written in Spanish.

What's inside

  • Normas de seguridad
  • Especificaciones
  • Especificaciones generales
  • Especificaciones del conexionado / peso
  • Especificaciones de los cables
  • Designación y funciones de las piezas
  • Instalación
  • Montaje con fijación
  • Montaje con adaptador de montaje en panel

Specifications

FluidAir, non-corrosive gas and non-flammable gas
Pressure range (ZSE20 vacuum)0.0 to -101.0 kPa
Pressure range (ZSE20F combined)-100.0 to 100.0 kPa
Pressure range (ISE20 positive)-0.100 to 1.000 MPa
Display/regulation range (ZSE20)10.0 to -105.0 kPa
Display/regulation range (ZSE20F)-105.0 to 105.0 kPa
Display/regulation range (ISE20)-0.105 to 1.050 MPa
Minimum setting unit0.1 kPa or 0.001 MPa
Test pressure500 kPa or 1.5 MPa
Supply voltage12 to 24 VDC (±10%)
Current consumption25 mA maximum
Indicator accuracy±2% of full scale ±1 digit
Repeatability±0.2% of full scale ±1 digit
Temperature characteristics±2% of full scale (25 °C standard)
Output typeNPN or PNP open collector, 1 output
Maximum load current80 mA
Maximum applied voltage28 V (NPN output)
Internal voltage drop1 V maximum at 80 mA
Response time1.5 ms maximum
Hysteresis modeVariable from 0
Short-circuit protectionProvided
DisplayLCD with 3 display fields
Display colorMain display red/green; secondary display orange
Digital filter0, 10, 50, 100, 500, 1000, 5000 ms
Ingress protectionIP40
Dielectric strength1000 VAC for 1 minute
Insulation resistance50 MΩ minimum
Operating temperature-5 to 50 °C
Storage temperature-10 to 60 °C
Humidity35 to 85% RH
Cable length2 m
Conductor area0.15 mm² (AWG26)
Insulation diameter1.0 mm
Cable colorsBrown, blue, black (3 wires)
Cable jacket diameterφ3.4
Body weight22 to 34 g depending on connection
Cable and connector weight+35 g
Mounting screw torque0.5 ±0.05 N·m
Panel adapter rotation90 degrees
Display unitsMPa, kPa, kgf/cm², bar, psi, inHg, mmHg
Connection sizesM5, R1/8, NPT 1/8 and metric/inch tube sizes

Frequently asked questions

What is the intended use of the ZSE20(F)/ISE20 pressure switch?

It is intended to measure, monitor and display pressure and provide an output signal.

What supply voltage does the switch require?

12 to 24 VDC (±10%), with maximum ripple of 10% (p-p).

What fluids can be used with this pressure switch?

Air, non-corrosive gas and non-flammable gas.

What is the ingress protection rating?

IP40.

Download PDF (757 KB)

More SMC Manuals


View all SMC manuals →