This equipment complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, providing reasonable protection against harmful interference in a residential installation. It generates, uses, and radiates radio frequency energy, and if not installed and used according to the instruction manual, may cause interference to radio communications. If harmful interference occurs, the user is encouraged to try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different circuit than the receiver, or consulting a dealer or experienced technician.
The VS-261 (2‑port) and VS-461 (4‑port) DVI Video Switch let users select video and stereo audio from multiple sources and output them to a single display and speaker set. Switching is done via front‑panel pushbuttons or an IR remote, and the unit supports both DVI‑I, DVI‑A, and DVI‑D signals on PC or Mac systems.
This manual covers package contents, installation steps, system requirements, supported operating systems, front and rear connector descriptions, hot‑plugging procedures, full technical specifications, troubleshooting tips, and warranty information.
| Number of ports | 2 (VS‑261) or 4 (VS‑461) |
|---|---|
| Maximum resolution | 1920 × 1200 (DDC2B) |
| Power adapter | DC 9 V, 1 A (9 V jack) |
| Operating temperature | 0 °C to 50 °C |
| Weight | 0.6 kg (VS‑261) / 0.8 kg (VS‑461) |
| Dimensions (L × W × H) | 14.0 × 8.8 × 5.55 cm (VS‑261) / 21.0 × 8.8 × 5.55 cm (VS‑461) |
Yes. The VS‑261 / VS‑461 supports hot plugging, allowing devices to be added or removed while the switch remains powered.
A DC 9 V power adapter that matches the specifications (DC 9 V) is required.