WV-NF284 network color dome camera is a IP network camera that supports MPEG-4 and JPEG digital signal output, with 3.6 times optical zoom and 10 times zoom function, supports PoE IEEE 802.3af, and an internal SD memory card slot for alarm recording or backup in the event of network failure.
This manual describes the key features of the Panasonic WV‑NF284 camcorder, including its 1‑megapixel progressive‑scan CCD sensor, dual MPEG‑4/JPEG output, 3.6× optical zoom lens, and built‑in PoE (IEEE 802.3af) for easy network installation. It also outlines the camera's networking capabilities, such as support for multiple protocols and SD‑card backup.
The specifications section lists detailed technical data such as image resolution, minimum illumination, power consumption, operating temperature, and physical dimensions, helping users configure and maintain the device effectively. This manual is written in Chinese.
| Image sensor | 1M type progressive‑scan CCD |
|---|---|
| Effective pixels | 659 (H) × 494 (V) |
| Scanning mode | Progressive scan |
| Minimum illumination (lens covered) | 1.5 Lux |
| Minimum illumination (electronic boost) | 0.09 Lux |
| Lens | 3.6× optical zoom, 28–10 mm focal length |
| Field of view | Horizontal 20°–73.5°, Vertical 15.6°–54° |
| Maximum aperture | F1.3–F1.7 |
| Network interface | 10Base‑T/100Base‑TX, RJ45 |
| Audio compression | G.726 ADPCM 32 kbps/16 kbps |
| Power supply | AC 24 V 50 Hz, DC 12 V, PoE (IEEE 802.3af) |
| Power consumption | ≈4.0 W (AC), ≈350 mA (DC), ≈4.0 W (PoE) |
| Operating temperature | -10 °C ~ +50 °C |
| Dimensions | 122 mm × 136 mm |
| Weight | ≈640 g |
Yes, the camcorder can be powered via PoE according to IEEE 802.3af.
The camera needs 1.5 Lux with the transparent lens, and as low as 0.09 Lux when electronic sensitivity boost is enabled.