Industrial

PHE426 is a single metallized film pulse capacitor from EPCOS, polypropylene dielectric, with a rated voltage of 100 to 1000 VDC, a rated capacitance of 63 to 250 nF, a rated loss of 0.001 to 0.0033 ohms, and a rated frequency of 1 kHz to 100 kHz. The working temperature is –55 to +105 °C.

无

This document describes the methods for cataloging DVD and Blu-ray discs using AACR2r and MARC 21.

This is a 3-port physical layer interface IC that supports 100Mb/s and 200Mb/s transfers, is compatible with any 1394 standard Link Layer Controller, supports 5V voltage, and supports single 3.3V power supply.

The document is about the query information of PD210 suppliers. It provides the features and characteristics of the PD210 product.

The PCN series is a straight-through connector that complies with DIN41612/IEC603-2 standard. The connector has 2 rows and 3 rows to choose from, with a pin count of 64 or 100, and wiring methods of straight-through, bending, press fit, stacking, and with wire.

PCF5001 is a POCSAG paging decoder produced by Philips Semiconductors. It supports two basic modes of operation and can decode POCSAG data streams and generate output signals.

PCA24S08 is a 1024 × 8-bit CMOS EEPROM with access protection

The PCA148x series is a low power, battery powered, 32 kHz clock oscillator for quartz crystal controlled wrist watches

The document describes an automotive subminiature PCB power relay with a continuous current capacity of 15 amps and a maximum switching capacity of 60 amps. It offers four different contact materials and six different contact forms, designed for high inrush applications. The relay meets UL Class F insulation standard and is available with a dust cover or sealed version.

PA1182 is a 2300-2400 MHz GaAs ultra linear power amplifier. Its maximum ratings are storage temperature -40°C to +125°C, DC voltage +30 volts, RF input power +15 dBm, and case temperature +90°C. The power amplifier has high IP3, low NF, high output power, and low cost.

This product is P8TG-XXXXE4:1 1.5KV ISOLATED 1.5W REGULATED SINGLE OUTPUT DIP24, which supports 24 and 48V wide input, 1.5W output, and the output voltage can be selected from 3.3, 5, 12, 15, and 18V.

This document describes the features and characteristics of the infrared detector modules, including high signal-to-noise ratio, compact size, and ease of use. The modules operate simply by connecting to a DC power supply and are suitable for infrared detection and CO2 laser detection. The document also mentions the availability of custom devices tailored to specific applications.

This document describes the features and characteristics of the SBD module P2H30QH10, including compatibility with Isolated Base SOT227, dual separated diodes, extremely low forward voltage drop, low power loss, high efficiency, and high surge capability. Typical applications include high frequency rectification.