Industrial

MX29L1611 is a 16MB pagemode flash memory from MXIC. It has a regulated voltage range of 3.0 to 3.6V for write, erase and read, and supports fast random access and page mode access. It has a 10000 cycle endurance, a page access depth of 16 bytes/8 words, and supports 32 equal sectors of 64k bytes each. Each sector's erase time is 200ms typical. It supports auto erase and auto program algorithms, which can automatically erase any one of the sectors or the whole chip with erase suspend capability. It can also automatically program and verify data at specified addresses. It has a status register feature for detection of program or erase cycle completion, and supports low VCC write inhibit and software and hardware data protection. Page program operation has internal address and data latches for 128 bytes/64 words per page, and the page programming time is 5ms typical. It has low power dissipation, with an active current of 50mA and a standby current of 20uA. It also has two independently protected sectors, and is packaged in 44-lead SOP and 48-lead TSOP.

The SY10/100E116 are quint differential line receivers designed for use in new, high-performance ECL systems. These devices have emitter-follower outputs and an internally generated reference supply (VBB) for single-ended reception.

SY10E112 is a high-performance ECL driver from Micrel. The device has a maximum propagation delay of 600ps, a VEE range of -4.2V to -5.5V, is compatible with industry standard 10KH and 100K I/O levels, has internal 75KΩ input pull-down resistors, and is compatible with Motorola MC10E/100E112. The device is available in a 28-pin PLCC package.

The HFA1150 is a high-performance, wideband, fast settling op amp built with Intersil's proprietary complementary bipolar UHF-1 process. The current feedback architecture delivers superb bandwidth even at very high gains (>300MHz at AV=10), and the low distortion and excellent video parameters make this amplifier ideal for communication and professional video applications. Though specified for ±5V operation, the HFA1150 operates with single supply voltages as low as 4.5V, and requires only 3.4mA of Icc in 5V applications (see Application Information section, and Application Note AN9891). For a lower power amplifier in a SOT-23 package, please refer to the HFA1155 data sheet.

The MSC121X series is a low-power, high-precision, high-performance MCU and A/D converter hybrid module that can be used for various digital signal processing applications. The MSC121X series includes five products: MSC1210, MSC1211, MSC1212, MSC1213 and MSC1214. They are different in the number and precision of the built-in A/D converters. MSC121X series adopts 8051 compatible MCU core, with up to 40MHz operating speed, which can meet the needs of various digital signal processing applications. MSC121X series also has 32kB flash memory, 1280 bytes of data SRAM, 2KB boot ROM and 16 interrupt sources, which can meet the storage and interrupt requirements of various applications. MSC121X series adopts 34 I/O pins, which can connect various peripheral devices. MSC121X series has low power consumption characteristics, in idle mode current consumption is less than 200µA, in stop mode current consumption is less than 100nA. MSC121X series also has programmable brownout reset and programmable low voltage detection function, which can improve the reliability of the system.

The MSM6679A-110 is a voice recognition processor that performs functions such as voice recognition, recording/playback, and speech synthesis. It integrates features such as a memory controller, flash memory interface, analog data conversion, Oki speech synthesizer interface, and PWM sound output.

The MSM7578 and MSM7579 are single-channel CODEC CMOS ICs for voice signals ranging from 300 to 3400 Hz.

MT25, 35 series are three-phase bridge rectifiers produced by Won-Top Electronics. They have low forward voltage drop, high current capability, high reliability, high surge current capability, and are ideal for printed circuit boards.

QT Optoelectronics LED circuit board indicators come in T-3/4, T-1 and T-1 3/4 lamp sizes, and in single, dual and multiple packages. The indicators are available in AIGaAs red, YLW and GRN.

This document introduces the features and characteristics of the MPX2202/MPXV2202G series products, including temperature compensation range, external dimensions, working temperature range, output signal, etc.

This is a technical specification for the PowerPC 603e RISC microprocessor. It introduces the internal structure, external interface, working principle and other contents of the microprocessor.

This document is a military datasheet for the LM710H-MLS voltage comparator.

The MM74C164 shift registers are a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. These 8-bit shift registers have gated serial inputs and clear. Each register bit is a D-type master/slave flip-flop. Data is serially shifted in and out of the 8-bit register during the positive going transition of clock pulse. Clear is independent of the clock and accomplished by a low level at the clear input. All inputs are protected against electrostatic effects.