Industrial

The HD74LV2G32A is a dual two-input OR gate from the Renesas uni logic series that is suitable for battery-powered products (e.g., notebook computers) and its low voltage and high-speed operation extends the battery life.

HCS374MS is a radiation-hardened eight-bit D-type flip-flop produced by Intersil. It has three-state output, positive edge trigger, and a working temperature range of -55oC to +125oC. This product can be used in military electronic equipment and has high radiation resistance and low power consumption.

1N3016B-1N3051B 1 Watt metal case Zener diodes are a well established Zener diode series for the 1N3016 to 1N3051 JEDEC registration in the metal case DO-13 package providing a glass hermetic seal for 6.8 to 200 volts.

MMB series metallized polyester film capacitors features small size and light weight, excellent reliability, flame retardant (UL94 V-0) epoxy resin coated outer layer, comply with RoHS standard.

This datasheet introduces the basic information of BZV58C10, including functions, packages, pins, pin functions, current voltage characteristics, impedance characteristics, temperature characteristics, and interface characteristics.

3EZ series silicon diodes, with an operating voltage range of 3.9 to 400 volts, high peak reverse power dissipation, high reliability, and low leakage current

This document describes the features and characteristics of Vishay Telefunken's BZM55B product. It is a silicon epitaxial planar Z-diode that is hermetically sealed and fits onto SOD 323 / SOT 23 footprints. The electrical data is identical to the devices BZT55B and TZMB. It has a very sharp reverse characteristic, low reverse current level, very high stability, low noise, and is available with tighter tolerances. It is commonly used for voltage stabilization applications.

SMCGLCE6.5, SMCGLCE170A, SMCJLCE6.5, SMCJLCE170A are Microsemi’s 1500 watt low capacitance surface mount transient voltage suppressors. They feature low capacitance, low impedance, high peak current, and fast response time. They are suitable for protecting high frequency applications, inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics.

The MAX6314 low-power CMOS microprocessor (μP) supervisory circuit is designed to monitor power supplies in μP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to μPs with bidirectional reset inputs, such as the 68HC11. It provides excellent circuit reliability and low cost by eliminating external components and adjustments. The MAX6314 also provides a debounced manual reset input. This device performs a single function: it asserts a reset signal whenever the VCC supply voltage falls below a preset threshold or whenever manual reset is asserted. Reset remains asserted for an internally programmed interval (reset timeout period) after VCC has risen above the reset threshold or manual reset is deasserted. The MAX6314 comes with factory-trimmed reset threshold voltages in 100mV increments from 2.5V to 5V. Preset timeout periods of 1ms, 20ms, 140ms, and 1120ms (minimum) are also available. The device comes in a SOT143 package. For a μP supervisor with an open-drain reset pin, see the MAX6315 data sheet.

BUZ 73AL is a voltage adjustable power transistor manufactured by Infineon, with a maximum voltage of 200V, a maximum current of 5.5A, and a typical on-resistance of 0.6Ω. It is packaged in a TO-220AB package.

BUZ344 is an N channel enhancement mode avalanche-rated power transistor with a maximum continuous current of 50A and a maximum on-resistance of 0.035 ohms.

The MAX4554/MAX4555/MAX4556 are CMOS analog ICs configured as force-sense switches for Kelvin sensing in automated test equipment (ATE). Each part contains high-current, low-resistance switches for forcing current, and higher resistance switches for sensing a voltage or switching guard signals. The MAX4554 contains two force switches, two sense switches, and two guard switches configured as two triple-pole/single-throw (3PST) normally open (NO) switches. The MAX4555 contains four independent single-pole/single-throw (SPST) normally closed (NC) switches, two force switches, and two sense switches. The MAX4556 contains three independent single-pole/double-throw (SPDT) switches, of which one is a force switch and two are sense switches. These devices operate from a single supply of +9V to +40V or dual supplies of ±4.5V to ±20V. On-resistance (6Ω max) is matched between switches to 1Ω max. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 0.25nA at +25°C and 2.5nA at +85°C. The MAX4554 is also fully specified for +20V and -10V operation. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility.