Industrial

This document describes the features and characteristics of the Vishay Telefunken 1N4678 and 1N4717 silicon epitaxial planar Zener diodes, including the specified Zener voltage at different currents, maximum delta VZ, very high stability, and low noise. The product is primarily used for voltage stabilization.

IDT54/74FCT623T/AT/CT is a high-speed CMOS octal bus transceiver with 3-state bus-driving outputs for asynchronous two-way communication between data buses

The LTC1391 is a high performance CMOS 8-to-1 analog multiplexer. It features a serial digital interface that allows several LTC1391s to be daisy-chained together, increasing the number of MUX channels available using a single digital port. The LTC1391 features a typical RON of 45Ω, a typical switch leakage of 50pA and guaranteed break-before-make operation. Charge injection is ±10pC maximum. All digital inputs are TTL and CMOS compatible when operated from single or dual supplies. The inputs can withstand 100mA fault current. The LTC1391 is available in 16-pin PDIP, SSOP and narrow SO packages. For applications requiring 2-way serial data transmission, see the LTC1390 data sheet.

This document provides technical data for ADSP-2196 and describes the features and characteristics of the product

The ADS8343 is a 16-bit, 4-channel serial output sampling analog-to-digital converter with features such as bipolar input range, pin-for-pin compatibility with the ADS7841 and ADS8341, single supply operation from 2.7V to 5V, 4-channel single-ended or 2-channel differential input, up to 100kHz conversion rate, 86dB SINAD, and a serial interface.

The ADS7807 is a low-power, 16-bit, sampling Analog-to-Digital (A/D) converter with features such as 35mW maximum power dissipation, 50µW power-down mode, 25µs maximum acquisition and conversion time, ±1.5LSB maximum INL, 16-bit DNL with no missing codes, 86dB minimum SINAD with 1kHz input, ±10V, 0V to +5V, and 0V to +4V input ranges, single +5V supply operation, parallel and serial data output, pin-compatible with the 12-bit ADS7806, and the ability to use internal or external reference.

The AD7912/AD7922 are 10-bit and 12-bit, high speed, low power, 2-channel successive approximation ADCs, r

REF2912 REF2920 REF2925 REF2930 REF2933 REF2940 is a precision, low-power, low-voltage dropout voltage reference family from Texas Instruments, available in a tiny SOT23-3 package. The REF29xx's small size and low power consumption (50µA max) make it ideal for portable and battery-powered applications. The REF29xx does not require a load capacitor, but is stable with any capacitive load. Unloaded, the REF29xx can be operated with supplies within 1mV of output voltage. All models are specified for the wide temperature range, –40°C to +125°C.

This datasheet provides detailed information on the REC2.2-DRI series of products, including input and output voltages, power, efficiency, and temperature range.

This datasheet provides the datasheet for 15W 2” x 2” single and dual output ECONOLINE DC/DC-Converter REC15- S_DRWB(Z) series, including input voltage range, output voltage accuracy, line voltage regulation, load voltage regulation, output ripple and noise, operating frequency, efficiency, isolation voltage, rated working voltage, isolation capacitance, isolation resistance, short circuit protection, continuous operating temperature range, storage temperature range, relative humidity, case material, package weight, MTBF etc.

This document describes the features and characteristics of the RB151 to RB157 1.5 Amp Single Phase Bridge Rectifiers, including low profile package, any mounting position, silver plated copper leads, and 50 Amp surge overload rating.

This document describes the features and characteristics of the HM-65262 16K x 1 Asynchronous CMOS Static RAM manufactured on March 1, 1997. It includes fast access time, low standby current, low operating current, data retention at 2.0V, TTL compatible inputs and outputs, etc.

The TK1181x series devices from TOKO, Inc. are DC-DC converters with miniature package (SOT-23L-6), few external components, internal rectifier and regulator, wide input voltage range (1.1 to 18 V), selectable output voltages and single battery cell operation.

This document describes the features and characteristics of the 256K x 36/512K x 18 Pipelined SRAM with NoBL™ Architecture CY7C1354BV25 and CY7C1356BV25, produced by Cypress Semiconductor Corporation.

74VHCT573A is a high-performance circuit in the 74 series. It has fast speed, low power consumption, output compatible with TTL, and has power-on protection and electrostatic discharge protection functions. It can be used to interface 5V to 3V circuits.