Industrial

The LCX16244A is a low voltage CMOS 16-bit bus buffer (non-inverted) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs.

The LCX16244 is a low voltage 16-bit buffer/line driver with 5V tolerant inputs and outputs. It is designed to be used as a memory and address driver, clock driver, or bus oriented transmitter/receiver.

This document describes an improved method for the simultaneous measurement of sirolimus and tacrolimus concentrations in blood, in which the drugs are first isolated from whole-blood specimens by solid phase extraction and then analyzed by liquid chromatography and electrospray-mass spectrometry.

The LCX16240A is a low voltage CMOS 16-BIT BUS BUFFER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs.

This document introduces HPLC methods for the analysis of two antihypertensive drugs

This document describes a new HPLC method for the determination of the tricyclic antidepressant doxepin in 'Aponal 100' tablets. The method uses an extra densely bonded Eclipse XDB-C18 column, which is made with a special Zorbax silica support and designed to reduce or eliminate strong adsorption of basic or acidic compounds. The method is stable at neutral pH and shows excellent and rapid resolution of tricyclic aromatic amines at low buffer concentration. Doxepin is separated from 'Aponal 100' tablets with no interference from excipients.

A simplified and fast protocol for the analysis of DNA fragmentation during apoptosis

This paper describes the use of the Agilent 2100 bioanalyzer to analyze the efficiency and kinetics of the cleavage process for the removal of His-tags from recombinant proteins. Data on the processing of 6xHis-tagged GFP (Green Fluorescent Protein) and IL-1β (Interleukin-1 beta) proteins is presented here as part of a comprehensive analysis of the TAGZyme system1.

The 74LCX162374 is a 16-bit D-type flip-flop with 5V tolerant inputs and outputs and 26Ω series resistors. The device is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The 26Ω series resistor in the output helps reduce output overshoot and undershoot. The device is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.

The TLC04/MF4A-50 and TLC14/MF4A-100 are monolithic Butterworth low-pass switched-capacitor filters. Each is designed as a low-cost, easy-to-use device providing accurate fourth-order low-pass filter functions in circuit design configurations. Each filter features cutoff frequency stability that is dependent only on the external-clock frequency stability. The cutoff frequency is clock tunable and has a clock-to-cutoff frequency ratio of 50:1 with less than ±0. 8% error for the TLC04/MF4A-50 and a clock-to-cutoff frequency ratio of 100:1 with less than ±1% error for the TLC14/MF4A-100. The input clock features self-clocking or TTL- or CMOS-compatible options in conjunction with the level shift (LS) terminal.

The 74LCX14 is a low voltage CMOS HEX SCHMITT INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications. It can be interfaced to 5V signal environment for inputs It has same speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. Pin configuration and function are the same as those of the 74LCX04 but the 74LCX14 has hysteresis between the positive and negative input threshold typically of 0.8V. This together with its schmitt trigger function allows it to be used on line receivers with slow rise/fall input signals. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

TLC04 is a voltage amplifier that provides high gain and low input bias current.

The LCX157 is a high-speed quad 2-input multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four outputs present the selected data in the true (noninverted) form. The LCX157 can also be used as a function generator. It is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.