Industrial

The bq2018 is a low-cost charge/discharge counter that works with an intelligent host controller to provide charge and discharge information for rechargeable batteries. It has various features, including internal offset calibration for improved accuracy, NVRAM registers for capacity monitoring, and a single-wire serial interface. It can operate in different modes and has an internal timebase, making it suitable for battery pack integration.

This datasheet provides detailed information about the 74LCX14, including a product overview, features, functions, pinout, package, etc.

The document introduces the characteristics of bq2010 gas gauge ic. bq2010 gas gauge ic can detect the battery charge in charging and discharging state, and estimate the self-discharge current of the battery using the internal temperature sensor and timer. Finally, the available charge of the battery is calculated. The ic can also display the available charge of the battery via a 5-segment or 6-segment led display.

74LCX125 is a low voltage quad buffer with 5V tolerant inputs and outputs, which can interface 5V systems with 3V systems. The device is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.

The 74LCX125 is a low voltage quad buffer with 5V tolerant inputs and outputs from Fairchild Semiconductor Corporation. It has 3-STATE outputs and the inputs tolerate voltages up to 7V, allowing the interface of 5V systems to 3V systems. The 74LCX125 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.

bq2007 is a highly integrated monolithic CMOS IC designed to provide intelligent battery charging and charge status monitoring for stand-alone charge systems.

The document describes the features and characteristics of the bq2005 Fast-Charge IC, including sequential fast charge and conditioning of two NiCd or NiMH battery packs, hysteric PWM switch-mode current regulation or gated control of an external regulator, easy integration into systems or use as a stand-alone charger, pre-charge qualification of temperature and voltage, direct LED outputs display battery and charge status, fast-charge termination by ∆ temperature/∆ time, -∆V, maximum voltage, maximum temperature, and maximum time, optional top-off and pulse-trickle charging.

bq2004e/h fast charge ic integrates closed-loop current control circuitry, making it a cost-effective solution for stand-alone and system-integrated chargers for batteries of one or more cells.

The bq2004E and bq2004H Fast Charge ICs provide comprehensive fast charge control functions together with high-speed switching power control circuitry on a monolithic CMOS device. Integration of closed-loop current control circuitry allows the bq2004 to be the basis of a cost-effective solution for stand-alone and system-integrated chargers for batteries of one or more cells. Switch-activated discharge-before-charge allows bq2004E/H-based chargers to support battery conditioning and capacity determination. High-efficiency power conversion is accomplished using the bq2004E/H as a hysteretic PWM controller for switch-mode regulation of the charging current. The bq2004E/H may alternatively be used to gate an externally regulated charging current. Fast charge may begin on application of the charging supply, replacing pre-charge.

bq2004 is a fast charge and conditioning ic launched by texas instruments for nickel cadmium or nickel-metal hydride batteries, supporting hysteretic PWM switch-mode current regulation or gated control of an external regulator, can be easily integrated into systems or used as a stand-alone charger, supporting temperature and voltage pre-charge qualification, configurable, direct LED outputs display battery and charge status, supporting ∆ temperature/∆ time, peak volume detection, -∆V, maximum voltage, maximum temperature and maximum time fast-charge termination, optional top-off charge and pulsed current maintenance charging, logic-level controlled low-power mode (< 5µA standby current)

bq2003 is a nickel cadmium or nickel-metal hydride battery fast charge and conditioning circuit, which supports switch-mode current regulation or external regulator gate control, and can be easily integrated into the system or used alone.

bq2002E/G is a low-cost CMOS battery charge controller that provides reliable charge termination for both NiCd and NiMH battery applications.

This document describes the features and characteristics of the bq2002E and bq2002G Fast-Charge ICs, including fast charging of nickel cadmium or nickel-metal hydride batteries, direct LED output for displaying charge status, various methods for fast charge termination, optional top-off charge, selectable pulse trickle charge rates, and low-power mode.