TEXAS Manuals

SM320F2810-EP, SM320F2811-EP, SM320F2812-EP SM320C2810-EP, SM320C2811-EP, SM320C2812-EP Digital Signal Processors Data Manual, describes the features and characteristics of SM320F2810-EP, SM320F2811-EP, SM320F2812-EP SM320C2810-EP, SM320C2811-EP, SM320C2812-EP Digital Signal Processors

The VSP2262 is a complete mixed-signal processing IC for digital cameras, providing signal conditioning and Analog-to-Digital (A/D) conversion for the output of a CCD array. The primary CCD channel provides Correlated Double Sampling (CDS) to extract video information from the pixels, –6dB to +42dB gain range with digital control for varying illumination conditions, and black level clamping for an accurate black level reference. Input signal clamping and offset correction of the input CDS are also performed. The stable gain control is linear in dB. Additionally, the black level is quickly recovered after gain change.

The VSP2232 is a complete mixed-signal processing IC from Texas Instruments (TI) for digital cameras that provides signal conditioning and analog-to-digital conversion for the output of a CCD array.

This document is the datasheet of DEM-PCM3500, which introduces the features and characteristics of the product.

OPA3684 is a low-power, triple current-feedback operational amplifier from Texas Instruments. It features a 170MHz bandwidth, 1.7mA supply current, 120mA output current, and can operate in a single supply of 5V to 12V or a dual supply of ±2.5V to ±6.0V.

DEM-DAI1742 is a complete evaluation platform for the PCM1742 24-bit, 192kHz stereo audio Digital-to-Analog Converter (DAC) from Texas Instruments (TI). The platform includes all necessary connectors and circuitry for interfacing to audio test systems and commercial audio equipment.

The DEM-ADS1216 is a high-resolution analog-to-digital converter from TI. This evaluation board is used to evaluate the performance of the ADS1216. It supports 24-bit no missing code performance and has 8 input channels that can be configured as up to 8 differential channels. The multiplexer is followed by a programmable gain amplifier with selectable gains of up to 128. Hardware options include user defined clock frequency, internal or external reference, and input biasing. All of the ADS1216's features and functionality can be exercised using the pull-down menus available from the DEM-ADS1216 software.

cdcv857b is a low-delay clock distributor from texas instruments that can distribute a single differential clock input to 10 differential clock outputs. the frequency range is 60mhz to 200mhz. the device supports spread spectrum clock, the static phase offset is ±50ps, the period jitter is ±35ps, and the device enters low-power mode when no clk input signal is applied or pwrdwn is low. the device is powered by dual 2.5v supplies and is packaged in a 48-pin tssop or 56-ball microstar juniorbga.

The CDCV857A is a high-performance, low-skew, low-jitter zero delay buffer that distributes a differential clock input pair (CLK, CLK) to ten differential pairs of clock outputs (Y[0:9], Y[0:9]) and one differential pair of feedback clock output (FBOUT, FBOUT). The clock outputs are controlled by the clock inputs (CLK, CLK), the feedback clocks (FBIN, FBIN), and the analog power input (AVDD). When PWRDWN is high, the outputs switch in phase and frequency with CLK. When PWRDWN is low, all outputs are disabled to high impedance state (3-state), and the PLL is shut down (low power mode). The device also enters this low power mode when the input frequency falls below a suggested detection frequency that is below 20 MHz (typical 10 MHz). An input frequency detection circuit wi

CDCV857 is a 2.5V phase-locked loop (PLL) clock driver from TI, which is used for double data rate synchronous DRAM applications. The device adopts low-power design, and has low jitter, low skew, zero delay and other characteristics. Its working frequency range is 60MHz to 200MHz, and it can drive 10 differential clock outputs. When the input clock frequency is lower than 20MHz, the device will enter low power mode, and shut down the PLL.

The CDCV855 is a high-performance, low-skew, low-jitter zero delay buffer that distributes a differential clock input pair (CLK, CLK) to four differential pairs of clock outputs (Y[0:3], Y[0:3]) and one differential pair of feedback clock outputs (FBOUT, FBOUT). When PWRDWN is high, the outputs switch in phase and frequency with CLK. When PWRDWN is low, all outputs are disabled to a high-impedance state (3-state), and the PLL is shut down (low-power mode). The device also enters this low-power mode when the input frequency falls below a suggested detection frequency that is below 20 MHz (typical 10 MHz). An input frequency detection circuit detects the low-frequency condition and after applying a >20-MHz input signal this detection circuit turns on the PLL again.

The document describes a phase-locked loop clock driver for double data-rate synchronous DRAM applications. It features spread spectrum clock compatibility, operating frequency range of 60 to 140 MHz, low jitter, and the capability to distribute one differential clock input to ten differential outputs. It also includes a two-line serial interface, high-impedance state, and low quiescent current consumption.

CDCV304 is a PCI-X clock buffer produced by Texas Instruments. It operates at a frequency of 0MHz to 140MHz. The low output skew is less than 100ps. It can distribute one clock input to one bank of four output clocks. When OE is low, the output is low. CDCV304 operates at a voltage of 3.3V. It is suitable for automotive and industrial applications and has a working temperature range of -40°C to 85°C.

SCAS688A is a 1.8V phase-locked loop clock driver for double data rate (DDR II) applications. It is spread spectrum clock compatible and operates at a frequency range of 10 MHz to 400 MHz. It has features such as low current consumption, low jitter, low output skew, and low phase offset. It distributes one differential clock input to ten differential outputs.

The CDCR61A is an independent crystal clock generator from Texas Instruments. It supports 400MHz differential clock signal output, and provides single-ended 1/2 clock signal output. It can be selected to output 300MHz or 400MHz clock signal.