TEXAS Manuals

This document is about Texas Instruments Incorporated and its subsidiaries (TI) products. It mainly introduces the features and characteristics of the products.

This document is a data manual for the Texas Instruments (TI) product MSDS 1394, providing important information about the product.

This document is a technical manual about the products and services of Texas Instruments Incorporated and its subsidiaries (TI). TI reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, or other intellectual property right.

TSB43AB23 is an IEEE 1394a-2000 OHCI PHY/Link Layer controller that features extended resume signaling for compatibility with legacy DV components. It is fully compliant with the 1394 Open Host Controller Interface Specification and supports IEEE Std 1394-1995 and IEEE Std 1394a-2000 standards. The controller provides a high-performance serial bus functionality.

This document is the Texas Instruments TSB12C01A Data Manual, which introduces the IEEE 1394-1995 High-Speed Serial-Bus Link-Layer Controller SLLS219B

The document describes the features and characteristics of the TPS794xx family of low-dropout (LDO) linear voltage regulators, including high power-supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses. The family is available in small outline MSOP-8 PowerPAD and SOT223-6 packages, and each device is stable with a small 2.2-µF ceramic capacitor on the output. Available models include 1.8 V, 2.5 V, 2.8 V, 3 V, 3.3 V, and adjustable (1.2 V to 5.5 V).

This product is a IEEE 1394a-2000 fully compliant controller that supports 100/200/400 megabits per second of transmission speed.

This file introduces the features and characteristics of the TSB12LV32 TSB12LV32I product, which is a general-purpose link-layer controller that is compliant with IEEE 1394-1995 and P1394a and can be used for computer peripherals and consumer audio/video electronics.

SLLS418I is a 1394 interface chip produced by TI, supports 1394a-2000 standard, supports connecting multiple devices, and has automatic power-off and low power consumption.

This document describes the issue of disappearing IDLE in Beta systems and provides a workaround

TSB15LV01 is a video signal processor integrated with a 1394 link layer controller from TI. It supports multiple CCD sensors and can be used in PC video camera, video conferencing, video capture, still picture capture, set-top boxes, video phone, gaming, webcam, robot, security and other fields.

This document describes a slight potential for PHY lock-up in a receiving node (including a repeating node) when a peer node is powered off or unplugged while transmitting data to the receiving node. If node B is unplugged or powered down while transmitting, its peer node A could see corrupted data on its port's twisted pair lines during the unplug or powerdown sequence. A rare condition has been discovered in which the node A PHY has the potential to enter a lock-up state after receiving a particular sequence of corrupted signals on the twisted pairs during unplug or powerdown of node B as node B is transmitting. Node A does see the bus reset event caused by the unplug or powerdown of node B but does not complete the collection of valid SelfID's. When in this state, the node A PHY is unaware of and does not respond to the bus reset caused by the plug-in of a new node C (or to the power-up of node B), this causes the just-connected node B or C to continuously issue bus resets. This causes the entire network to cease to function until the node A PHY is hard reset or disconnected from the network. This condition has never been reported in normal use; rather, it was observed in rigorous lab testing. All future releases of these devices shall have this issue fixed.

The TSB82AA2 OHCI-Lynx is a discrete 1394b link-layer device from TI, which supports PCI burst transfers and deep FIFOs.

This document introduces TI's FireWire® devices, which are compliant with the 1394b standard and advance home networking and high-speed data transfer. The 1394 (FireWire®) connectivity technology enables simple, low-cost, high-bandwidth real-time data connectivity between computers, peripherals, and consumer electronics. These devices are suitable for consumer electronics such as camcorders, A/V receivers, SACD and DVD-audio players, DVCRs, digital TVs, computers, and peripherals. 1394-compliant products offer consumers a quick way to transfer large amounts of data between components and create robust, high-speed connections between devices throughout the home or office. The original specification, 1394a, called for data transfer rates of 100, 200, and 400 Mbps over a distance of up to 4.5 meters.

This document describes the features and characteristics of a product, including support for IEEE P1394b Revision 1.33+, interoperability with Firewire, i.LINK, and SB1394, support for multiple transfer rates, and energy-saving features.