TEXAS Manuals

The TLC7226C, TLC7226I, and TLC7226M are chips that integrate four 8-bit voltage-output digital-to-analog converters (DACs) with output buffer amplifiers and interface logic. They are suitable for applications such as process control, automatic test equipment, and automatic calibration of large system parameters.

The TPS799xx family is a low-dropout (LDO) low-power linear regulator with excellent AC performance, low noise, high PSRR, and fast start-up time.

The ADS7844 is an 8-channel, 12-bit sampling analog-to-digital converter (ADC) with a synchronous serial interface. Typical power dissipation is 3mW at a 200kHz throughput rate and a +5V supply. The reference voltage (VREF) can be varied between 100mV and VCC, providing a corresponding input voltage range of 0V to VREF. The device includes a shutdown mode that reduces power dissipation to under 1µW. The ADS7844 is ensured down to 2.7V operation. Low power, high speed, and onboard multiplexer make the ADS7844 ideal for battery-operated systems such as personal digital assistants, portable multichannel data loggers, and measurement equipment. The serial interface also provides low-cost isolation for remote data acquisition. The ADS7844 is available in a 20-lead QSOP package and the MAX147 equivalent 20-lead SSOP package and is ensured over the –40°C to +85°C temperature range.

The ADS1232/ADS1234 are 24-bit analog-to-digital converters (ADCs) with an onboard, low-noise programmable gain amplifier (PGA), precision delta-sigma ADC and internal oscillator, providing a complete front-end solution for bridge sensor applications including weigh scales, strain gauges and pressure sensors.

ADS8343 is a 16-bit, 4-channel serial output sampling analog-to-digital converter produced by Texas Instruments. It has bipolar input range, single supply, 4-channel single-ended or 2-channel differential input, up to 100kHz conversion rate, 86dB SINAD and SSOP-16 package.

This data sheet introduces the features and characteristics of CD54HC540F3A. The product is an eight-channel buffer and line driver with three-state outputs and the ability to drive 15 LSTTL loads.

The CC1101 is a low-cost sub-1GHz transceiver designed for very low-power wireless applications.

This reference manual provides a detailed description of bq20z60-R1/bq20z65-R1 battery management ICs, including protection features, gas gauging, charge control, LED display, device operating mode, etc.

bq24180 is a fully integrated switch-mode single-cell Li-Ion charger with full USB compliance and accessory power connection.

The MSP430x11x2/12x2 series are low-power 16-bit MCUs that include the MSP430F1122/F1132 and MSP430F1222/F1232 products. The series MCUs operate in the 1.8 V to 3.6 V power supply range and provide 200 µA active mode current, 0.7 µA standby mode current, and 0.1 µA power down mode current. The MSP430x11x2/12x2 series MCUs feature many low-power characteristics, including five power saving modes, a low standby mode wake-up time, and a 125 ns instruction cycle time.

The TMP112 is a high-accuracy, low-power, digital temperature sensor from TI. It is available in a tiny SOT563 package and requires no external components. It can read temperatures to a resolution of 0.0625°C from 0°C to +65°C with a maximum accuracy of 0.5°C. From -40°C to +125°C, the maximum accuracy is 1.0°C. The TMP112 also has both SMBus and two-wire interface compatibility, allowing up to four devices to be connected to one bus. It also features an SMBus alert function. The TMP112 is ideal for extended temperature measurement in communication, computer, consumer, environmental, industrial, and instrumentation applications.

This datasheet introduces the features of TI's DAC7718 chip, including voltage output range, resolution, power consumption, etc.

The TLV5620C and TLV5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltages and GND; and, the DACs are monotonic. The device is simple to use, because it runs from a single supply of 3 V to 3.6 V. A power-on reset function is incorporated to ensure repeatable start-up conditions. Digital control of the TLV5620C and TLV5620I is over a simple three-wire serial bus that is CMOS compatible and easily interfaced to all popular microprocessor and microcontroller devices. The 11-bit command word comprises eight bits of data, two DAC select bits, and a range bit, the latter allowing selection between the times 1 or times 2 output range. The DAC registers are double buffered, allowing a complete set of

The XTR115 XTR116 4-20mA current loop transmitters feature low quiescent current, 5V regulator, sensor excitation VREF, low span error, low nonlinearity error, wide loop supply range, SO-8 package