Key facts
- Brand
- Panasonic
- Model
- KX-NCP500, KX-NCP1000
- Category
- Other
- Industry
- Electronics
- Documents
- 4
- Languages
- EN · ZH
- Last added
- 2012-05-03
Start here
Panasonic KX-NCP500 / KX-NCP1000 IP Network Manual
The document provides an overview of using Panasonic KX‑NCP500 and KX‑NCP1000 group phones on a VoIP network, describing required IP parameters, VLAN and DiffServ settings, and QoS considerations. It also explains how the phones communicate with other locations over LAN and the cost benefits of IP‑based calls.
Detailed sections cover network management (DHCP, VLAN, network watchdog), VoIP installation requirements, LAN connection steps, programming of NCPMPR cards and IP phones, and a comprehensive troubleshooting appendix with error codes and suggested remedies. This manual is written in Chinese.
Panasonic KX-NCP500, KX-NCP1000 specifications
| 2.4 GHz signal source frequency range | 2401 MHz – 2480 MHz |
|---|---|
| 2.4 GHz signal source power output | 0.004 W to 0.4 W |
| DECT 6.0 frequency range | 1881 MHz – 1898 MHz |
| DECT 6.0 power output | < 0.25 W |
| DECT 6.0 (6.0) frequency range | 1920 MHz – 1930 MHz |
| DECT 6.0 (6.0) power output | < 0.12 W |
Source: Panasonic KX-NCP500 KX-NCP1000 Group Telephone System Installation Manual
All Panasonic KX-NCP500, KX-NCP1000 documents by type
Instruction set, parameters and examples for configuring or programming the device.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What should I do if the PBX emits smoke or an abnormal smell?
Unplug the PBX from the AC outlet immediately and contact an authorized Panasonic Factory Service Center after the smoke stops.
Will the PC shut down or enter standby while the Maintenance Console is connected?
No. The PC will not perform any shutdown operation or enter power‑saving standby mode while the Maintenance Console is connected to the PBX.