Key facts
Start here
Netgear WG102 ProSafe 802.11g Wireless Access Point Reference Manual
This reference manual covers the installation, regulatory compliance, and antenna configuration for the Netgear WG102 ProSafe 802.11g Wireless Access Point. It includes placement guidelines, RF exposure warnings, and a list of approved detachable antennas for North America, Australia, and the European Community.
The document also explains Wi‑Fi Protected Access (WPA) security modes for home/SOHO environments, public hotspots, and mixed‑mode deployments, and provides a glossary of networking terms.
NETGEAR WG102 specifications
| Default IP address | 192.168.0.229 |
|---|---|
| Power over Ethernet (PoE) support | Yes |
| LAN port LED colors | Amber for 10 Mbps, Green for 100 Mbps |
| Default IP configuration mode | Static IP |
Source: NETGEAR WG102 ProSafe 802.11g Wireless Access Point Installation Guide
All NETGEAR WG102 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What should I do if the WLAN light is not lit?
Check that the antennas are tightly connected, power‑cycle the unit, and contact NETGEAR if the light remains off.
From: NETGEAR WG102 ProSafe 802.11g Wireless Access Point Installation Guide
Can the WG102 be powered by PoE?
Yes, if you use a PoE‑enabled switch you can omit the external power adapter.
From: NETGEAR WG102 ProSafe 802.11g Wireless Access Point Installation Guide
What is the required minimum separation distance for the antennas to meet RF exposure guidelines?
The antennas must be installed at least 20 cm (7.9 in.) away from persons.
From: Netgear WG102 ProSafe 802.11g Wireless Access Point Reference Manual
How can I reduce interference if the access point causes harmful interference?
Reorient or relocate the receiving antenna, increase the distance between the equipment and receiver, use a different circuit outlet, or consult a technician.
From: Netgear WG102 ProSafe 802.11g Wireless Access Point Reference Manual
What is the required minimum separation distance for the antenna?
The antennas must be installed to ensure a minimum separation distance of 20 cm (7.9 in.) from persons.
From: NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
How can I reduce interference if my wireless connection experiences problems?
You can reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, or connect the equipment to a different circuit. Consulting a radio/TV technician is also recommended.
From: NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual