Key facts
Start here

Dell ST2220L/ST2220M Monitor User's Guide
This document serves as the User's Guide for the Dell ST2220L and ST2220M flat panel displays. It details the package contents, product features, and identifies the various parts and controls located on the front, back, and sides of the monitor. The guide explains how to set up the device, utilize the On-Screen Display (OSD) for adjustments, and operate the monitor using shortcut keys for preset modes and brightness/contrast.
Read onlineDell ST2220 specifications
| Screen type | Active matrix - TFT LCD |
|---|---|
| Panel type | TN |
| Screen dimensions | 54.61 cm (21.5 inches) |
| Preset display area | Horizontal 476.64 mm (18.76 inches); Vertical 268.11 mm (10.56 inches) |
| Pixel pitch | 0.248 mm |
| Viewing angle | 160° vertical typical, 170° horizontal typical |
| Luminance output | 250 CD/m² typical |
| Contrast ratio | 1000:1 typical |
| Dynamic contrast ratio | 8,000,000 to 1 |
| Faceplate coating | Antiglare with hard-coating 3H |
| Backlight | LED light bar system |
| Response time | 5 ms typical |
| Color depth | 16.7 mil colors |
| Color gamut | 78% |
| Horizontal scan range | 30 kHz to 83 kHz (automatic) |
| Vertical scan range | 56 Hz to 76 Hz (automatic) |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| Video display capabilities | 480i/480p/576i/576p/720p/1080i/1080p |
| Video input signals | Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance |
| Synchronization input signals | Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green) |
| AC input voltage/frequency/current | 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0 A (max.) |
| Inrush surge current | 120 V: 30 A (max.); 240 V: 60 A (max.) |
| Connector type | D-sub: Blue connector |
| Signal cable type | D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor |
| Dimensions with stand | Height 385.86 mm; Width 520.64 mm; Depth 203.68 mm |
| Dimensions without stand | Height 326.02 mm; Width 520.64 mm; Depth 59.40 mm |
| Stand dimensions | Height 149.85 mm; Width 203.68 mm; Depth 203.68 mm |
| Weight with packaging | 5.19 kg (11.43 lb) |
| Weight with stand assembly and cables | 4.09 kg (9.01 lb) |
| Weight of stand assembly | 0.67 kg (1.48 lb) |
| Operating temperature | 0° to 40° C (32° to 104°F) |
| Non-operating temperature | Storage/shipping -20° to 60° C (-4° to 140°F) |
| Operating humidity | 10% to 80% (non-condensing) |
| Non-operating humidity | Storage/shipping 5% to 90% (non-condensing) |
| Operating altitude | 4,485 m (14,700 ft) max |
| Non-operating altitude | 12,191 m (40,000 ft) max |
| Thermal dissipation | 95.54 BTU/hour maximum; 68.24 BTU/hour typical |
| Power consumption (normal operation) | 28 W maximum, 20 W typical |
| Power consumption (active-off mode) | Less than 1 W |
| Power consumption (switch off) | Less than 0.5 W |
Source: Dell ST2220 Monitor User's Guide
All Dell ST2220 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What comes in the box with the Dell ST2220 monitor?
The monitor ships with a stand, power cable, VGA cable, safety information, drivers and documentation media, and a quick setup guide.
What is the maximum preset resolution of the ST2220?
The maximum preset resolution is 1920 x 1080 at 60 Hz.
What is the recommended resolution for this monitor?
The recommended mode is 1920x1080.
What should I do if the monitor displays a warning message about unsupported resolution?
This means the monitor cannot synchronize with the signal; check the Monitor Specifications for addressable frequency ranges.
What is the screen size of the Dell ST2220T?
The monitor has a 21.5-inch diagonal screen.
What resolution does the monitor support?
The recommended mode is 1920 x 1080 at 60 Hz.
