The document describes a camera with features such as auto light control, automatic gain control, and automatic tracing white balance. The camera has specifications including minimum illumination, signal-to-noise ratio, horizontal resolution, and auto iris lens control.
This manual begins with safety warnings, including electric‑shock cautions and grounding requirements, and explains the need for qualified service personnel during installation. It describes the camera’s features such as a 1/2‑inch interline transfer CCD, auto light control, and selectable synchronization modes.
The document then covers installation and wiring, detailing power connections for the 220‑240 V AC version (WV‑CL270) and the 24 V AC version (WV‑CL274E), connector pin assignments for the auto‑iris lens, and mounting procedures. A specification table lists key performance data, and sections on standard and optional accessories complete the guide.
| Image sensor resolution | 752 (H) x 582 (V) pixels, interline transfer CCD |
|---|---|
| Horizontal resolution | 480 lines |
| Minimum illumination | 0.8 Ix (0.08 foot‑candle) at F1.4 |
| Power source (WV‑CL270) | 220 V‑240 V AC 50 Hz, 3.8 W |
| Power source (WV‑CL274E) | 24 V AC 50 Hz, 3.5 W |
| Dimensions (without lens) | 67 mm W × 65 mm H × 123 mm D |
Connect the power cord to an electrical outlet of 220 V‑240 V AC 50 Hz.
The camera uses a CS‑mount (1"‑32UN) and the lens weight must be less than 450 g.
The camera requires a minimum illumination of 0.8 Ix (0.08 foot‑candle) at F1.4.