Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The linear scale detected an overspeed exceeding its specified maximum speed. The manual's first action is: “PR”
A CPU error was detected in the linear scale's machine side detector. The manual's first action is: “PR”
An unusable axis error occurred due to a power module issue with the axis set to "F" (not used axis). The manual's first action is: “PR”
Absolute position lost because backup voltage in absolute position detector dropped. The manual's first action is: “AR”
Excessive speed deflection 1 occurred when speed command and feedback differ by 50r/min or more for longer than set time. The manual's first action is: “PR”
Machine side detector No signal 2 detected from pulse-type linear scale or ball screw encoder, or spindle encoder no-signal. The manual's first action is: “PR”
Motor side detector No signal 1 detected for PLG Z-phase signal. The manual's first action is: “PR”
Machine side detector communication error due to corrupted data or cut-off communication with linear scale or ball screw end detector. The manual's first action is: “PR”
Machine side detector memory error detected internally within the linear scale. The manual's first action is: “PR”
Machine side detector data error detected from linear scale or ball screw end detector. The manual's first action is: “PR”
Machine side detector EEPROM/LED abnormality detected in memory data or LED deterioration with linear scale. The manual's first action is: “PR”
Machine side detector CPU error 1 detected during initialization of linear scale or ball screw end detector. The manual's first action is: “PR”
Machine side detector initial communication error because linear scale or ball screw end detector failed to communicate initially. The manual's first action is: “PR”
Synchronous control/detector communication error due to unconfigured master axis detector, cut-off communication, or cable/connector issues. The manual's first action is: “PR”
Motor side detector initial communication error because communication failed, value not set correctly, or connector is disconnected/loose. The manual's first action is: “PR”