Industrial

12-Bit Deep Color Quad HDMI Receiver ADI Confidential ADV7614 Rev. SpB is a high performance HDMI receiver from Analog Devices that supports 4:1 multiplexing and offers 36/30/24 bit deep color support.

ST3230C..R series is a double-sided cooled, high surge capability, high average current, fatigue-free power semiconductor device, mainly used in DC motor control, controlled DC power supply, AC controller and other applications

The ST20-JPI parallel port to JTAG interface is a host interface to allow connection from a PC parallel port to any JTAG diagnostic controller based ST20 development board.

This data sheet describes the features and characteristics of the ADV7611 low power HDMI receiver.

The STMicroelectronics ST19KF16 Smartcard MCU with 1088 Bits Modular Arithmetic Processor supports 3V ± 10% or 5V ± 10% supply voltage, 32K Bytes of USER ROM WITH PARTITIONING, SYSTEM ROM FOR LIBRARIES, 1984 Bytes of RAM WITH PARTITIONING, 16 KBytes of EEPROM WITH PARTITIONING, and fast cryptographic functions processing.

This data sheet describes the features and characteristics of the ADV7619 Rev. B

This is a technical specification of SST39SF010A / SST39SF020A / SST39SF040.

The document describes the HDMI transceiver ADV7623, which has a fast port switching feature. The product supports HDMI 1.4a standard, including features such as audio return channel, 3D TV support, content type bits, CEC 1.4 compatibility, and extended colorimetry. It also supports High-Bandwidth Digital Content Protection (HDCP 1.4) and HDCP repeater functionality. The product features a 4-input, 1-output multiplexed HDMI transceiver, with support for 225 MHz HDMI Rx and Tx, and 36-/30-/24-bit Deep Color. It also includes Xpressview fast switching, character- and icon-based on-screen display, and support for DVI RGB graphics. The product is equipped with an ultralow jitter digital PLL and adaptive equalizer for cable lengths up to 30 meters. It also supports internal extended display identification data (EDID) RAM, EDID replication, 5V power support, and hot plug functionality.

ADV7622 is a 4-input, 1-output multiplexed HDMI transceiver that supports HDMI 1.4a standard. It features audio return channel, 3D TV support, content type bits, CEC 1.4 compatibility, extended colorimetry, High-Bandwidth Digital Content Protection (HDCP 1.4), HDCP repeater support, etc.

This data sheet introduces the features and characteristics of SST29EE010 / SST29LE010 / SST29VE010 1 Mbit (128K x8) Page-Mode EEPROM, including single voltage read and write operations, endurance, low power consumption, fast page write operation, fast read access time, latched address and data, automatic write timing, internal VPP generation, write end detection, hardware and software data protection, TTL I/O compatibility, JEDEC standard.

AD8194 is a 2 input 1 output HDMI/DVI high speed signal switch with pin-to-pin compatibility with the AD8193. It enables HDMI 1.3-compliant receiver and supports data rates of 250 Mbps to 2.25 Gbps and pixel clocks of 25 MHz to 225 MHz. AD8194 provides fully buffered unidirectional inputs/outputs. Its equalized inputs can operate with long HDMI cables (20 m at 2.25 Gbps). AD8194 features matched 50 Ohm input and output on-chip terminations, low added jitter, single-supply operation (3.3 V), and is RoHS-compliant LFCSP.

The SST29EE512 / SST29LE512 / SST29VE512 are 64K x8 page-mode EEPROMs with single voltage read and write operations. They feature superior reliability, low power consumption, fast page-write operation, fast read access time, latched address and data, automatic write timing, internal VPP generation, end of write detection, toggle bit, data# polling, hardware and software data protection, product identification accessible via software operation, TTL I/O compatibility, JEDEC standard flash EEPROM pinouts and command sets.

AD8197B is a 4:1 HDMI/DVI switch released by Analog Devices. It supports HDMI 1.3 standard and has 4 inputs, 1 output. It can support data rates of 250Mbps to 2.25Gbps and pixel clocks of 25MHz to 225MHz. The switch also features equalized inputs, fully buffered unidirectional inputs/outputs, switchable 50Ω on-chip terminations, switchable output 50Ω on-chip terminations, pre-emphasized outputs, low added jitter, single-supply operation (3.3V), 4 auxiliary channels, bidirectional unbuffered inputs/outputs, flexible supply operation (3.3V to 5V), HDCP standard compatible, allows switching of DDC bus and 2 additional signals, output disable feature, reduced power dissipation, and removable output termination.

AD8192 is a 2:1 HDMI/DVI switch launched by ADI, which supports HDMI 1.3a, has ESD protection, supports data rates from 250Mbps to 2.25Gbps and pixel clocks from 25MHz to 225MHz, and can be used for front panel buffers, independent HDMI switches, multiple input displays, projectors, A/V receivers, and set-top boxes.