Industrial

The SS6734G is a 3-pin low-dropout linear regulator with superior characteristics, which include zero base current loss, very low drop-out voltage, and output voltage accuracy of 2%. Typical ground current remains approximately 55µA, for loads ranging from zero to maximum. Dropout voltage at an output current of 300mA is exceptionally low. Built-in output current limiting and thermal limiting provide maximum protection against fault conditions. The SS6734G is available in SOT-23-3, SOT-89, and TO-92 packages.

ML5805 is a 5.8GHz variable data rate FSK transceiver with integrated PA, for 5.725GHz to 5.850GHz unlicensed ISM band

The Solid State Sensors SS400 Series digital position sensors have features such as a 3.8-30 VDC supply voltage, digital current sinking output, 3 pin in-line PCB terminals, and a quad-Hall design that virtually eliminates mechanical stress effects. They also have temperature compensated magnetics and customizable operate/release points. The sensors support bipolar, unipolar, and latching magnetics. They have a high output current capability of up to -50 mA and operate/release points symmetrically around zero gauss (bipolar/latch). The operating temperature range is -40 to +150°C (-40 to +302°F). The package material is Plaskon 3300H. A surface mount version is also available: SS400-S (with cut and formed leads).

LTC1091/LTC1092/LTC1093/LTC1094 is a 10-bit serial I/O data acquisition system with programmable unipolar/bipolar conversions, differential/single-ended multiplexer configurations, sample-and-holds, single supply 5V, 10V or ±5V operation, direct 3- or 4-wire interface to most MPU serial ports and all MPU parallel I/O ports, analog inputs common mode to supply rails, resolution: 10 bits, total unadjusted error (A Grade): ±1LSB over temp, fast conversion time: 20µs, low supply current LTC1091: 3.5mA Max, 1.5mA Typ LTC1092/LTC1093/LTC1094: 2.5mA Max, 1mA Typ.

This document describes the features and characteristics of the SR502 to SR5010 5 Amp Schottky Barrier Rectifier series, including low switching noise, low forward voltage drop, high current capability, and high surge current capability.

The ZLDO330 low dropout linear regulator provides an output voltage of 3.3V with a typical quiescent current of only 560µA and a dropout voltage of 30mV at 100mA. It is packaged in the Zetex SM8 small outline surface mount package, ideal for space-saving applications.

ARF32 is a Bluetooth module launched by Renesas Electronics, which supports data and audio transmission, supports Bluetooth v2 end product certification, and uses uart-type ttl serial interface. The air rate is 723kbps.

The TS924 is a low noise, low distortion, high output current quad operational amplifier. Suitable for applications requiring low voltage, low noise, and high current.

The product is C&D's flagship product, using high-frequency high-efficiency synchronous rectifier topology, with 1.2-15V output voltage and 6A output current, it can achieve -40℃ to +70℃ wide temperature range work, and has input undervoltage, overvoltage, reverse polarity, output overvoltage, output current limiting and continuous short circuit protection.

The LTC ®1871 is a wide input range, current mode, boost, flyback or SEPIC controller that drives an N-channel power MOSFET and requires very few external compo- nents.

AD7475/AD7495 are 12-bit, 1 MSPS ADCs with features such as fast throughput rate, low power consumption, and wide input bandwidth. They are suitable for battery-powered systems, personal digital assistants, medical instruments, mobile communications, instrumentation and control systems, and data acquisition systems.

Introduces the ML4824's features, including internally synchronized PFC and PWM, low total harmonic distortion, reduces ripple current in the storage capacitor between the PFC and PWM sections, average current, continuous boost leading edge PFC, voltage loop fast transconductance error amp, high efficiency trailing edge PWM can be configured for current mode or voltage mode operation, average line voltage compensation with brownout control, PFC overvoltage comparator eliminates output “runaway” due to load removal, current fed gain modulator for improved noise immunity, overvoltage protection, UVLO, and soft start

The ADC12DL066 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 66 Megasamples per second (MSPS), minimum. This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance and a 450 MHz Full Power Bandwidth. Operating on a single 3.3V power supply, the ADC12DL066 achieves 10.7 effective bits and consumes just 686 mW at 66 MSPS, including the reference current. The Power Down feature reduces power consumption to 75 mW. The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. The digital outputs from the two ADCs are available on separate 12-bit buses with an output data format choice of offset binary or two's complement. To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC12DL066 can be connected to a separate supply voltage in the range of 2.4V to the digital supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of −40˚C to +85˚C.

The VLMW61.. is one of the most robust and light efficient LEDs in the market. Its ceramic package makes it the ideal light source in applications of high thermal considerations allowing the additional current drive for a maximum light output while maintaining a high service life of up to 50K h. The reflector inside this package is filled with a mixture of silicone and TAG phosphor. The TAG phosphor converts the blue emission partially to yellow, which mixes with the remaining blue to white.