Industrial

The SSM2304 is a fully integrated, high efficiency, Class-D stereo audio amplifier that is designed to maximize performance for portable applications.

BYT51 is a silicon mesa rectifier produced by Vishay Telefunken. It features glass passivated junction, hermetically sealed package and low reverse current.

The SSM2301 is a fully integrated, high efficiency, Class-D audio amplifier with Σ-Δ modulation, which supports single supply operation from 2.5 V to 5.0 V and provides 20nA ultralow shutdown current. It is suitable for use in mobile phones, MP3 players, portable gaming devices, portable electronics and educational toys.

The PS2800C-1 and PS2801C-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light.

The SSM2306 is a fully integrated, high efficiency, Class-D stereo audio amplifier designed to maximize performance for portable applications.

The AD7323 is a 12-bit plus sign SAR ADC with true bipolar input ranges and software-selectable input ranges. It features four analog input channels, a channel sequencer, and single-ended, true differential, and pseudo differential analog input capability. Its characteristics include high-speed serial interface, low power consumption, internal 2.5V reference voltage, etc.

This document is about SSM2317. SSM2317 is a Filterless High Efficiency Mono 3 W Class-D Audio Amplifier with Automatic Level Control (ALC) function, which can improve dynamic range and prevent distortion. Its maximum output power is 3 W, and its working voltage range is 2.5 V to 5.5 V.

ssm2315 is a highly efficient filterless class-d audio amplifier from analog devices, inc. it supports single-supply operation, 3ω and 8ω loads, and a working voltage range of 2.5v-5.5v. it also features ultralow shutdown current, short-circuit protection, and thermal protection.

The document describes a filterless high efficiency mono 2.8 W class-D audio amplifier, SSM2305 Rev. A, which features Σ-Δ modulation, no sync necessary when using multiple class-D amplifiers, 2.8 W output into 4 Ω load, 1.6 W output into 8 Ω load, 89% efficiency, >98 dB signal-to-noise ratio, single-supply operation from 2.5 V to 5.5 V, 20 nA ultralow shutdown current, short-circuit and thermal protection, available in 8-lead, 3 mm × 3 mm LFCSP and MSOP packages, pop-and-click suppression, built-in resistors to reduce board component count, and fixed and user-adjustable gain configurations.

The AD1674 is a complete, multipurpose, 12-bit analog-to-digital converter, consisting of a user-transparent onboard sample-and-hold amplifier (SHA), 10 volt reference, clock and three-state output buffers for microprocessor interface. The AD1674 is pin compatible with the industry standard AD574A and AD674A, but includes a sampling function.

The CC2550 is a low cost true single chip 2.4 GHz transmitter designed for very low power wireless applications. The circuit is intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band at 2400-2483.5 MHz. The RF transmitter is integrated with a highly configurable baseband modulator which has a configurable data rate up to 500 kbps. Performance can be increased by enabling a Forward Error Correction option, which is integrated in the modulator. The CC2550 provides extensive hardware support for packet handling, data buffering and burst transmissions. The main operating parameters and the 64-byte transmit FIFO of CC2550 can be controlled via an SPI interface. In a typical system, the CC2550 will be used together with a micro-controller and a few passive components. CC2550 is part of Chipcon’s 4th generation technology platform based on 0.18 µm CMOS technology. This data sheet contains preliminary data, and supplementary data will be published at a later date. Chipcon reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. The product is not fully qualified at this point.

This datasheet introduces the features and characteristics of the SSM2335 filterless, high efficiency, mono 3 W class-D audio amplifier.

This datasheet provides detailed information on the PS9587,PS9587L1,PS9587L2,PS9587L3 optocouplers, including features, specifications, and applications.

The product is a single-channel 3W D-class audio amplifier with ultra-high efficiency and ultra-low power consumption, supporting 3Ω and 8Ω loads, and can be applied to mobile phones, MP3 players, portable gaming consoles, portable electronic devices and other fields