Industrial

The LD1585C is a low dropout voltage regulator capable of providing up to 5A of output current. The device features a low dropout voltage and very fast transient response. It is suitable for low voltage applications where transient response and minimum input voltage are critical.

This document describes the features and characteristics of the 2 × 2W filterless Class-D stereo audio amplifier SSM2356. It has high efficiency, low distortion, and single-supply operation, making it suitable for applications such as mobile phones, MP3 players, and portable gaming devices.

This document is about the datasheet of H11C4/ H11C5/ H11C6 optocouplers, which introduces the features and characteristics of the product, such as turn-on time, isolation voltage, switching current, etc.

CLC030 is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital video data conforming to SMPTE 125M and 267M standard definition, 10-bit wide component video and SMPTE 260M, 274M, 295M and 296M high-definition, 20-bit wide component video standards.

AD8364 is a dual 60dB TruPwr™ detector from Analog Devices. It can measure the RMS value of high crest factor signals. It has a wide dynamic range, low temperature drift, low power consumption and small package, which is suitable for wireless infrastructure power amplifier linearization/control, antenna VSWR monitoring, gain and power control and measurement, transmitter signal strength indication (TSSI) and other applications.

The SSM2517 is a filterless digital Class-D amplifier with PDM digital input interface. It can drive 4-ohm load up to 2.4W and 8-ohm load up to 1.38W with 5.0V supply voltage. The total harmonic distortion plus noise (THD + N) is less than 1% and efficiency reaches 92%. Quiescent power consumption is only 10.4mW.

This document describes the features and characteristics of Agilent AFBR-5903Z/5903EZ/5903AZ FDDI, Fast Ethernet Transceivers in 2 x 5 Package Style, including multisourced 2 x 5 package style, single +3.3 V power supply, compatibility with wave solder and aqueous wash processes, compliance with FDDI PMD standard and ATM 100 Mb/s physical layer requirements, etc.

The LM134/LM234/LM334 are 3-terminal adjustable current sources characterized by a operating current range of 10000:1, an excellent current regulation and a wide dynamic voltage range of 1V to 10V. The current is determined by an external resistor without requiring other external components. Reverse voltages of up to 20V will only draw a current of several microamperes. This enables the circuit to operate as a rectifier and as a source of current in a.c. applications. For the LM134/LM234/LM334, the voltage on the control pin is 64mV at +25°C and is directly proportional to the absolute temperature (°K). The simplest external resistor connection generates a current with ≈ 0.33%/°C temperature dependence. Zero drift can be obtained by adding an additional resistor and a diode to the external circuit.

The document pertains to the C8051F310/1/2/3/4/5/6/7 family of ISP Flash MCUs, which feature a 10-bit ADC, comparators, and debugging capabilities.

The SSM2375 is a fully integrated, high efficiency, Class-D audio amplifier. It is designed for portable and mobile applications with its small size and low power consumption. The amplifier features a spread-spectrum Σ-Δ modulation scheme that provides excellent performance with low distortion and high efficiency.

LTC1147-3.3 and LTC1147-5/LTC1147L are high-efficiency step-down switching regulator controllers with features such as wide input voltage range, high efficiency, low standby current, and short-circuit protection.

The SSM2804 is an audio subsystem designed specifically for mobile phones. It features 3 single-ended stereo audio inputs with optional differential mode, stereo, 1.4 W, filterless Class-D amplifiers with Σ-Δ modulation, integrated receiver path bypass switch, configurable, high performance capless headphone output with true ground Class-G technology, optional hardware-based headphone level limiter, I2C control interface, volume control, flexible input/output mixing, output mode control, EMI emissions control, automatic level control (ALC), adjustable headphone level limiter, low shutdown current, short-circuit and thermal protection, pop-and-click suppression, and is available in a 30-ball, 2.5 mm × 3.0 mm WLCSP.

The SSM2377 is a filterless, high efficiency, mono 2.5 W Class-D audio amplifier. It features high efficiency, high signal-to-noise ratio, and low electromagnetic emissions.

This data sheet introduces the features of the SSM3302 filterless Class-D stereo audio amplifier