Industrial

This document introduces the features and characteristics of Virtex-E, including high density, high performance, low power consumption, high flexibility, high performance and sophisticated storage hierarchy.

The NCP1200 is a PWM current-mode controller for low-power universal off-line supplies. It is housed in an SOIC-8 or PDIP-8 package, representing a major leap toward ultra-compact switchmode power supplies. The circuit allows the implementation of a complete offline battery charger or a standby SMPS with few external components due to a novel concept. Furthermore, an integrated output short-circuit protection allows the designer to build an extremely low-cost AC-DC wall adapter associated with a simplified feedback scheme. The controller drives low gate-charge switching devices like an IGBT or a MOSFET, requiring very small operating power. Due to current-mode control, the NCP1200 simplifies the design of reliable and cheap offline converters with extremely low acoustic generation and inherent pulse-by-pulse control. When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the skip cycle mode and provides excellent efficiency at light loads. This occurs at low peak current, so no acoustic noise takes place. Finally, the IC is self-supplied from the DC rail, eliminating the need for an auxiliary winding. This feature ensures operation in the presence of low output voltage or shorts.

The XC95144 is a high-performance CPLD from Altera that provides advanced in-system programming and test capabilities for general purpose logic integration. It is comprised of eight 36V18 Function Blocks, providing 3,200 usable gates with propagation delays of 7.5 ns.

Raychem Circuit Protection PolySwitch is a resettable electrical component that protects electronic devices from overcurrent damage.

The TMPN3150B1AFG is a Neuron Chip for Distributed Intelligent Control Networks (LONWORKS). It has a wide range of I/O functions and supports various communication protocols.

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps. The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan). Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware. The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller. The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components. CC2400 is based on Chipcon’s SmartRF-03 technology in 0.18 µm CMOS.

LTC1628/LTC1628-PG are high efficiency dual 5V/3.3V step-down converters with various features such as high efficiency, 2-phase synchronous switching regulators, output voltage accuracy, dual N-channel MOSFET synchronous drive, power good output voltage monitor, adjustable soft-start current ramping, etc.

MPS has launched a series of 5 watt power BWR modules for aerospace, marine, telecom and computer applications. These modules are compact, full-featured, 5 watt output power, and low cost, which can provide system architects with unprecedented design and layout flexibility.

M29W160ET M29W160EB is a 16Mbit (2Mb x8 or 1Mb x16, Boot Block) 3V supply flash memory with a voltage range of 2.7V to 3.6V for program, erase and read. This product has 70, 90ns of access time, 10µs of programming time, 35 memory blocks, 1 boot block (top or bottom location) - 2 parameters and 32 main blocks. Its program/erase controller has embedded byte/word programming algorithms, erase suspend and resume modes allow reading and programming another block, and erase suspend time also supports bypass programming commands for faster production/batch programming. In addition, the product also supports temporary block non-protection mode, 64-bit security code, low power consumption (standby and automatic standby) and 100,000 programming/erase cycles/block. The electronic signature includes the manufacturer code (0020h), top device code (M29W160ET: 22C4h) and bottom device code (M29W160EB: 2249h). The product supports TSOP48 (N) and TFBGA48 (ZA) two packages.

The LTC4556 provides all necessary power control, level translation and supervisory functions for a smart card or S.A.M. card interface. The part contains a low noise charge pump plus LDO for generating VCC power, as well as all necessary level shifting circuitry. The card voltage can be set to either 1.8V, 3V or 5V. The LTC4556 includes a card detection channel with automatic debounce circuitry. To reduce wiring costs, the LTC4556 interfaces to a microcontroller via a simple 4-wire serial interface. Multiple devices may be connected in daisy-chain fashion so that the number of wires to the card socket board is independent of the number of sockets. Status data is returned over the same interface. Extensive security features ensure proper deactivation sequencing in the event of a supply fault or a smart card electrical fault. The smart card pins can withstand greater than 10kV ESD in-situ with no additional components. The LTC4556 is available in a small, low profile (0.75mm), 4mm × 4mm QFN package.

GL05-HT3 to GL24-HT3 are low capacitance ESD protection diodes for high-speed data interfaces. They provide transient protection according to IEC 61000-4-2 (ESD) and IEC 61000-4-5 (Lightning) standards. These diodes are suitable for high-speed data lines, cellular handsets, USB port protection, LAN equipment, and peripherals. They come in a small package and are lead (Pb)-free components. They comply with RoHS 2002/95/EC and WEEE 2002/96/EC standards.

ISL6295 is a low voltage fuel gauge IC from Intersil. It measures, stores and reports all critical parameters required for rechargeable battery monitoring with a minimum of external components. It precisely measures charge/discharge current as well as voltage and temperature of a battery pack.

This is a document about M16C/80 single-chip microcomputers, which introduces the features and applications of this product

The TFDU6102 is a low-power infrared transceiver module compliant to the latest IrDA physical layer standard for fast infrared data communication, supporting IrDA speeds up to 4.0 Mbit/s (FIR), and carrier based remote control modes up to 2 MHz. Integrated within the transceiver module are a PIN photodiode, an infrared emitter (IRED), and a low-power CMOS control IC to provide a total front-end solution in a single package.