Industrial

The LT®3845 is a high voltage, synchronous, current mode controller used for medium to high power, high effi ciency supplies. It offers a wide 4V to 60V input range (7.5V minimum start-up voltage). An onboard regulator simplifi es the biasing requirements by providing IC power directly from VIN. Burst Mode® operation maintains high effi ciency at light loads by reducing IC quiescent current to 120μA. Light load effi ciency is also improved with the reverse inductor current inhibit function which supports discontinuous operation. Additional features include adjustable fi xed operating frequency that can be synchronized to an external clock for noise sensitive applications, gate drivers capable of driving large N-channel MOSFETs, a precision undervoltage lockout, 10μA shutdown current, short-circuit protection and a programmable soft-start. The LT3845 is available in a 16-lead thermally enhanced TSSOP package.

This document describes the technical specifications of TLWA1100 (T11), including dimensions, luminous flux, color temperature, operating temperature, etc.

The ADC11DL066 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 11-bit digital words at 66 Megasamples per second (MSPS), minimum. This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance and a 450 MHz Full Power Bandwidth. Operating on a single 3.3V power supply, the ADC11DL066 achieves 10.3 effective bits and consumes just 686 mW at 66 MSPS, including the reference current. The Power Down feature reduces power consumption to 75 mW. The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. The digital outputs from the two ADCs are available on separate 11-bit buses with an output data format choice of offset binary or two’s complement. To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC11DL066 can be connected to a separate supply voltage in the range of 2.4V to the digital supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of −40˚C to +85˚C. An evaluation board is available.

The ST16C554/554D is a full-duplex serial communication controller developed by EXAR Corporation, which supports 16-byte FIFO, multiple interface modes and multiple interrupt control modes. It can be widely used in network devices, data terminals, industrial control and consumer electronics.

Am29SL800B 8 Megabit (1 M x 8-Bit/512 K x 16-Bit) CMOS 1.8 Volt-only Super Low Voltage Flash Memory is a flash memory chip with single power supply operation, ultra low power consumption, high performance and flexible sector architecture.

This data table provides detailed information on AC-0650BS, AC-0930BS, AC-0960EU, AC-0960BS, AC-09100BS, AC-09100EU, AC-09100BS, AC-1225BS, AC-1250BS, AC1250EU, AC-1250BS, AC12100BS, AC-12100EU, AC-12100BS, AC-1550BS products, including model, output voltage, output current, output regulation, output connector, high voltage test, operating temperature, input voltage, magnetizing current, approvals, and case style.

The VLMKE340 is an SMD LED product produced by Vishay Semiconductors. It has excellent brightness and multiple colors, with EIA and ICE standard packaging, compatible with automatic placement equipment, suitable for IR reflow and TTW soldering, and can be used in automotive, telecommunications, audio and video equipment, and office equipment.

DF19 series is a ultra low profile connector system, suitable for connecting cables, FPC and fine coaxial cables. This series of connectors have extremely high integration and flexibility, to meet various application needs.

This datasheet introduces the features and characteristics of TLV1393 and TLV2393 dual bipolar comparators. They are built using a new Texas Instruments low-voltage, high-speed bipolar process, and are specifically designed for low-voltage, single-supply applications. TLV1393 is ideal for low-power systems, with its typical supply current of only 0.16 mA and improved response time of 0.7 µs. TLV2393 features excellent AC performance with a response time of just 0.45 µs, three times that of the LM393. These devices are available in TSSOP packages, which are 1.1 mm thick and 25% smaller than standard surface-mount packages, making them ideal for high-density circuits, especially in hand-held and portable equipment.

HUF76409D3, HUF76409D3S 17A, 60V, 0.071 Ohm, N-Channel, Logic Level UltraFET Power MOSFET is a low on-resistance power MOSFET produced by Intersil.

DF13 series is a 1.25mm pitch miniature crimping connector launched by DNP, which features small size, multiple contacts, and automatic mounting.

The datasheet provides information about the 100324 low power hex TTL-to-ECL translator.

The LXM1614 series of Direct Drive™ CCFL (Cold Cathode Fluorescent Lamp) Inverter Modules is specifically designed for driving LCD backlight lamps. Although similar to the RangeMAX LXM1612 wide range dimming inverters, the LXM1614 family offers two separate brightness controls for lamp current amplitude and duty cycle. This innovation of dual brightness control with extended dimming, combined with Linfinity’s high efficiency Direct Drive topology, provides the industry’s most feature rich, small form factor inverter available. The wide range dimming provides exceptional display readability at less than 1% of full brightness, allowing both power savings and low ambient light operating capability.

AD667 is a complete 12-bit D/A converter, featuring a dual-buffered latch and single-chip high stability buried Zener reference. The converter uses 12 precision high speed bipolar current steering switches and a laser trimmed thin-film resistor network to provide fast settling time and high accuracy. Microprocessor compatibility is achieved by the on-chip dual-buffered latch. The design of the input latch allows low input current and ensures linear dependence of output offset voltage on input bias current.

The Avago ultra low power ACPL-x6xL digital optocouplers combine an AlGaAs light emitting diode (LED) and an integrated high gain photodetector. The optocoupler consumes extremely low power, at maximum 1.3mA IDD2 current per channel across temperature. With a forward LED current as low as 1.6 mA most microprocessors can directly drive the LED. An internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs. Maximum AC and DC circuit isolation is achieved while maintaining TTL/CMOS compatibility. The optocouplers CMOS outputs are slew-rate controlled and is designed to allow the rise and fall time to be controlled over a wide load capacitance range. The ACPL-x6xL series operates from both 3.3 V and 5 V supply voltages with guaranteed AC and DC performance from –40°C to +105°C. These low-power optocouplers are suitable for high speed logic interface applications.