Industrial

FRONT-MSTB 2,5/ 5-STF-5,08 is a connector product launched by PHOENIX CONTACT. Its rated current is 12A, rated voltage is 250V, pitch is 5.08mm, connection type is screw connection, and color is green.

This is a datasheet for MCV 1,5/ 4-GF-3,81, a 4-pin connector with a rated current of 8 A and a rated voltage of 160 V. The pin dimensions are 0.8 x 0.8 mm, the hole diameter is 1.2 mm, the insulating material group is IIIa, and the rated surge voltage is 2.5 kV. The connection is in accordance with the EN-VDE standard.

This is a PDF document about PHOENIX CONTACT GmbH & Co. KG PLH 16/ 6-10. It mainly introduces the product's specifications, such as rated voltage, pitch, pin dimensions, insulating material, etc.

This document is the user manual of Amphenol C 091 B series connectors. It mainly introduces the characteristics of the connectors, including the types of connectors, installation methods, temperature range, etc.

CCM03 MK II is a new range of connectors developed to interface with SIM/SAM cards. It has 6 or 8 contacts and can be connected via a metal cover or a hinged cover. The connector has excellent mechanical and electrical performance.

C20F line filter with inlet for high current is suitable for standard and medical applications and features a compact design with optimal electromagnetic shielding.

This is a document about Wiha Hex L-Keys products. These products are inch-sized hex keys, designed for inch-sized screws that are difficult to access. They feature chrome-vanadium steel blades that are through hardened and manganese-phosphated. The ballpoint design allows users to work at angles up to 25°. There is also a set of 13 hex keys in a ProStar holder, allowing easy removal of each key without moving others. The products meet the ASME B18.3-1998 standards.

This is a plug component with a rated current of 12 A, a rated voltage of 250 V, a pitch of 5 mm, 2 positions, a screw connection type, and a green color.

SKINTOP® BS-M with polyamide spiral strain relief is particularly used for flexible cables and handheld equipment, moving machine parts, and many applications in the instrument industry.

SFH 3219 is a NPN silicon phototransistor with integrated TOPLED light source. It features high linearity and is suitable for all soldering methods. It is suitable for applications in the 430-1150 nm wavelength range.

The TSP-WR Series industrial power supplies are from TracoPower, with power range of 180-600W, single- and two-phase wide-range input 100-230VAC, rugged metal case, industrial operating temperature range of -25°C to +70°C, power OK signal, remote On/Off, shock and vibration-proof, indefinite short circuit, overvoltage and overtemperature protection. It is suitable for industrial process control systems, machine tools and other industrial applications.

SPTA 1/ 5-3,5 is a PC terminal block from PHOENIX CONTACT with a nominal current of 9 A, a nominal voltage of 160 V, a pitch of 3.5 mm, 5 positions, a spring-cage connection, a soldering assembly, a 45 ° conductor/PCB connection direction and green color

The DS1602 is a real-time clock/elapsed time counter designed to count seconds when VCC power is applied and continually count seconds under battery backup power with an accuracy of two 32-bit counters. The counters can track seconds for over 125 years. It can count seconds from the time the battery is attached until VBAT is less than 2.5V. It can also count seconds while VCC is above VTP and retain the count in the absence of VCC under battery backup power. The clear function resets the selected counter to 0. The read/write serial port affords low pin count. The maximum current drain is less than 1µA from the VBAT pin when the serial port is disabled. It uses a one byte protocol to define read/write, counter address, and software clear function. It is available in an 8-pin DIP or optional 8-pin SOIC package. It operates in a temperature range of -40°C to +85°C. It can operate with reduced performance down to VCC = 2.5V. It is recognized by Underwriters Laboratory (UL).