Industrial

LTC1196/LTC1198 are 600ns, 8-bit A/D converters with sampling rates up to 1MHz. They are offered in 8-pin SO packages and operate on 3V to 6V supplies. Power dissipation is only 10mW with a 3V supply or 50mW with a 5V supply. The LTC1198 automatically powers down to a typical supply current of 1nA whenever it is not performing conversions. These 8-bit switched-capacitor successive approximation ADCs include sample-and-holds. The LTC1196 has a differential analog input; the LTC1198 offers a software selectable 2-channel MUX. The 3-wire serial I/O, SO-8 packages, 3V operation and extremely high sample rate-to-power ratio make these ADCs an ideal choice for compact, high speed systems. These ADCs can be used in ratiometric applications or with external references. The high impedance analog inputs and the ability to operate with reduced spans below 1V full scale (LTC1196) allow direct connection to signal sources in many applications, eliminating the need for gain stages. These ADCs have low power consumption (10 mW), low noise (40 μV RMS) and high accuracy (±1/2LSB), making them suitable for a wide variety of applications, including data acquisition, motor control, instrumentation and power measurement.

PPCBB 5 x 20 mm is a fuse holder from Schurter. It is suitable for 5 x 20 mm fuses for household appliances.

SFH 7741 is a lead (Pb) free product that is RoHS compliant. It is a proximity sensor with a typical working distance of 30mm. The sensor utilizes opto-hybrid technology with a Schmitt trigger output and open drain structure. It has extremely low power consumption, a very small SMD package, and high ambient light suppression. The SFH 7741 is eye safe according to the IEC 62471 standard without the need for external lenses. It is suitable for short range proximity sensing applications.

MCD 1,5/10-G1-3,81 is a connector product produced by PHOENIX CONTACT. Its rated current is 8 A, rated voltage is 160 V, pin pitch is 3.81 mm, number of positions is 10, color is green, and it can be assembled by soldering.

This is the 5x20mm open design fuseholder from Schurter, which meets the new requirements of IEC 60335-1 Ed.4.0 for appliances in unattended use. It can be used in industrial electronic and household appliances.

MCVR 1,5/ 3-ST-3,5 is a connector produced by Phoenix Contact. It has a rated current of 8 A and a rated voltage of 160 V. The connection method is screw connection.

PL17 Welding cable, for the transmission of high currents from the electric welding device to the welding tool

Wiha MagicSpring is an innovative tool that securely holds TORX® and TORX PLUS® screws. With this tool, TORX® or TORX PLUS® screws can be firmly held where desired. The highlight of the MagicSpring tools is the stainless steel 'magical' retaining spring that is laser-welded to the tip of the blade along with a thin cover disc. This completely new innovation acts as a clamp between the tool and TORX® or TORX PLUS® screws, ensuring a firm grip on the screws. The new tools are particularly beneficial when working with small or hard-to-reach screws. Simply place the screw on the tip of the blade and start turning. No more dropped or misplaced screws between components.

This document provides detailed information about the PC terminal block PLH 16/4-10 from PHOENIX CONTACT GmbH & Co. KG, including rated voltage, dimensions, and connection type.

PC4 HV/4-ST-7,62 is a plug component from PHOENIX CONTACT with a nominal current of 20A, a rated voltage of 800V, a pitch of 7.62mm, a screw connection and a green color.

This document describes the features and characteristics of the MCD 1.5/6-G1-3.81 product manufactured by PHOENIX CONTACT GmbH & Co. KG, including nominal current, nominal voltage, color, and assembly information.

This document describes an Einbaustecker that complies with IEC 60130-9 standard. The product has an IP 68 protection rating and features a screw closure and solder connections. It is designed for rear panel mounting. The temperature range is -40°C to +85°C. The contact materials are copper-zinc with silver and gold plating. The housing is made of zinc die-cast, with copper and nickel plating. The sealing is provided by an NBR gasket. The product offers excellent mechanical and electrical performance.

This is a PC terminal block from PHOENIX CONTACT, model PLH 16/ 2-10, rated current 76 A, rated voltage 400 V, pitch 10 mm, number of positions 2, connection type spring-cage conn., assembly soldering, conductor/PCB connection direction 0 °, color green.

BLT offers a comprehensive range of surface treatment products for electronic assembly, printed circuit board manufacturing and water treatment, including immersion agents, spray agents, water treatment agents, etc., which can effectively remove solder paste and flux residues on circuit boards to ensure product quality.