Industrial

UT 4 is a universal terminal block with screw connection from Schneider Electric, with test socket screws on both sides, cross section: 0.14-4 mm², AWG: 26-10, width: 6.2 mm, color: Gray

LTC1285/LTC1288 3V micropower sampling 12-bit A/D converters in SO-8 packages

MCVR 1,5/12-ST-3,5 is a connector from Phoenix Contact with a nominal current of 8 A, a rated voltage of 160 V, a pitch of 3.5 mm and 12 positions. The connection type is a screw connection.

This product is a MCDN 1,5/ 3-G1-3,5 P26THR type connector with an 8A rated current and a 160V rated voltage. The pin spacing is 3.5mm, there are 3 pins and the color is black.

RF 15 (15 x 15 mm) and RF 19 (19 x 19 mm) with distinct key click, for use under an overlay or with RK 90 keycaps. Can be fully illuminated.

C 091 B is a product of Amphenol. It has 3-8, 12 and 14 contacts and can be connected by soldering and crimping.

Philips 755 user manual, introduces the basic functions and operating methods of the mobile phone, including power on and off, making phone calls, receiving phone calls, viewing contacts, etc.

LE CW E2A OSTAR® - Lighting product, lead-free product, RoHS compliant. The main features are outstanding brightness and luminance due to pure surface emission and low Rth, typical color temperature of 2700K, 3000K, 3500K, 4200K, viewing angle of 120°, light emitting surface of 2.1mm x 2.1mm, technology of ThinGaN®, luminance of 18*106 cd/m² (4200K), optical efficiency of 32 lm/W (4200K), can be fixed by screws, for welding, ESD resistance of 2kV, packaging unit of 60 pcs per tray. Applications include general lighting, microscope illumination, VMS (variable message signs) and high end strobe lights.

The PCT 230/24-0,5 is a product of the PCT series. It is a single-phase primary switched mode power supply. The output voltage is 24V and the rated current is 0.5 A. The product has short-circuit protection, open-circuit protection, high efficiency, thermal overload protection and overload protection.

For mounting in the rack an air flow control fan unit featuring a direct flow design, providing high static pressure and high air flow. With steel housing and steel protective grille.

Pro-Wave now presents a series of mechno-electrical sensors and detectors produced by advanced piezoelectric polymer film technology. The polymer film of polyvinylidene fluoride (PVF2) exhibits a conspicuous piezoelectric effect and also has high compliance comparing with other piezoelectric crystals or ceramic materials. Because of its superior piezoelectric strain constant (g value), 10-20 times larger than piezoelectric ceramic, it is an ideal sensing material for converting mechanical to electrical energy.

PT 1,5/ 4-5,0-V is a PC terminal block from PHOENIX CONTACT. It has a rated current of 17.5 A, a rated voltage of 250 V, and a pitch of 5 mm. It can connect 4 conductors.

The four-level terminal block ST 2,5-PE/3L is especially suited for the compact wiring of three-phase loads. It has three feed-through levels and one PE connection which makes contact by simply snapping onto the mounting rail. Each terminal point can be labeled and features a testing option for 2.3 mm ∅ test connectors. Large-surface labeling is also possible in the terminal center.

smco5 3,0 x 4,0 magnet technical parameters

This document introduces Panasonic's opto-electronic switch products. The product features are small size, small light beam diameter, and different switching distances can be selected according to needs. It is suitable for embedded installation.