Industrial

FA7611CP(E) is a bipolar IC produced by Panasonic that contains the basic circuit necessary for PWM-type switching power supply control. This chip has low voltage operation (VCC = 3.6 to 22V), pre-drivers (CH1 is open-collector output or bipolar output, CH2 is open-collector output), power supply lockout function, soft-start function, and one capacitor shared for short circuit protection and soft start to minimize the number of external discrete components.

The EPI AC3 series inductors are optimized for National's LM267X and LM259X series. It uses low loss material and can work in high frequency switching converters, such as buck, boost or as output averaging filter inductor. EPI AC3 series inductors are also suitable for use in high quality filter applications.

This is the Altera Cyclone FPGA family data sheet, which introduces the characteristics of the products in the series.

This datasheet is for EM610FV16 series low power 64Kx16 SRAM. The series is fabricated by EMLSI’s advanced full CMOS process technology. The families support industrial temperature range from -40℃ to 85℃.

The EM6112K800V is a low power CMOS static random access memory from Toshiba with a capacity of 4,194,304 bits, organized as 524,288 words x 8 bits. It is fabricated using high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The EM6112K800V is well designed for low power applications, and particularly well suited for battery back-up nonvolatile memory applications. The EM6112K800V operates from a single power supply of 2.7V~3.6V and all inputs and outputs are fully TTL compatible.

The EM39LV088 is an 8M bits Flash memory organized as 1M x 8 bits. It uses a 2.7-3.6V power supply and features high performance Flash memory technology with a typical Byte-Program time of 14 µsec and a typical Sector/Block-Erase time of 18 ms. It has on-chip hardware and software data protection schemes, offering endurance of 100,000 cycles and data retention of over 10 years.

ELM98xxxA Series is a CMOS Voltage Regulator. It consists of reference voltage, error amplifier, short- protected control transistor, output voltage setting resistor, and so on. Output voltage is fixed internally with high accuracy. Two package types are available, SOT-89 and SOT-23.

The EL5192 and EL5192A are current feedback amplifiers with a very high bandwidth of 600MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 6mA and the ability to run from a single supply voltage from 5V to 10V, the amplifiers are also ideal for hand held, portable or battery-powered equipment. The EL5192A also incorporates an enable and disable function to reduce the supply current to 100µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier. The EL5192 is offered in the 5-pin SOT-23 package and the EL5192A is available in the 6-pin SOT-23 as well as the industry-standard 8-pin SO packages. Both operate over the industrial temperature range of -40°C to +85°C.

EL series capacitors characteristics

This document is about EHP-A07/SUG01-P01 technical data sheet. It is high power LED with small package, high efficiency, 120° viewing angle, 45lm@350mA luminous flux output, ESD protection, SMT soldering, total luminous flux, dominant wavelength parameters. It is used in TFT LCD display backlight, decorative and entertainment lighting, signal and symbol luminaries for orientation marker lights, etc.

EF Series, high thermal efficiency, complete power control circuits in a single package

The document describes the features and characteristics of the products.