Industrial

Buccaneer® USB waterproof connector series, with IP68 rating, provides single and double ended connectors, connectors use overmolded assembly to provide IP68 cable seal, connectors use screw threading to provide secure cable coupling, standard USB connector, suitable for PCB.

USB Buccaneer® is an IP68 rated USB connector that supports USB 2.0 protocol, with plug and play capability, visual mating indication, shielded system, single and double ended cables, screw coupling, PCB versions, dust and waterproof sealing when mated, low and high speed bus connection, 1.5Mbs to 480Mbs, hot pluggable, standard 4 pole interface, alignment indicator reduces risk of damage during mating, high noise immunity and EMI protection, suitable for PC and peripheral configuration, secure, proven locking system, direct mounting or via adaptor leads

The Buccaneer USB cable is IP68 rated, supports USB 2.0, is hot pluggable, and comes in single and double ended versions, through panel sealing versions, screw coupling versions, and PCB versions.

This document describes the Buccaneer series of IP68 rated USB connectors, which feature dust and waterproof sealing, high noise immunity and EMI protection, and suitability for PC and peripheral configuration.

Buccaneer is a series of IP68 waterproof USB connectors launched by Bulgin, which has plug and play capability, visual mating indication, shielded system, single and double ended cables, screw coupling, adaptor leads, dust and waterproof sealing when mated, low and high speed bus connection, hot pluggable, standard 4 pole interface, alignment indicator reduces risk of damage during mating, high noise immunity and EMI protection, suitable for PC and peripheral configuration, secure, proven locking system, for use on PCBs.

This document introduces the BUCCANEER product of Bulgin. The product is a waterproof, dustproof, shielded Ethernet connector that meets the Cat 5e standard. The product uses PE or PUR cable jacket and has IP68 protection rating.

HM6208H Series is a high-speed CMOS static RAM with a single 5V supply and high-density 24-pin package. It features high-speed access time, low power consumption, completely static memory, and direct TTL compatibility.

These high intensity white LED lamps are based on InGaN material technology. A blue LED die is coated by phosphor to produce white. The typical resulting color is described by the coordinates x = 0.31, y = 0.31 using the 1931 CIE Chromaticity Diagram. The lamps have a well defined spatial radiation pattern and high luminous white emission.

These high intensity white LED lamps are based on InGaN material technology. A blue LED die is coated by phosphor to produce white. The typical resulting color is described by the coordinates x = 0.31, y = 0.31 using the 1931 CIE Chromaticity Diagram. These LED lamps have well defined spatial radiation pattern and high luminous white emission. The viewing angle options are 15°, 23°, and 30°. They can be used with standoff or non-standoff leads. Compared to incandescent bulbs and other alternative white light sources, they offer reduced power consumption, higher reliability, and increased optical/mechanical design flexibility.

HLMP-132x series, HLMP-142x series and HLMP-152x series T-1 high intensity LED lamps are designed for applications that require higher on-axis intensity than is achievable with a standard lamp. The light generated is focused to a narrow beam to achieve this effect.

The HIP6521 provides the power control and protection for four output voltages in high-performance microprocessor and computer applications. The IC integrates a voltage-mode PWM controller and three linear controllers, as well as monitoring and protection functions. The PWM controller is intended to regulate the microprocessor memory core voltage with a synchronous-rectified buck converter. The linear controllers are intended to regulate the computer system’s AGP 1.5V bus power, the 2.5V clock power, and the 1.8V power for the North/South Bridge core voltage and/or cache memory circuits. Both the switching regulator and linear voltage references provide ±2% of static regulation over line, load, and temperature ranges. All outputs are user-adjustable by means of an external resistor divider. All linear controllers employ bipolar NPNs for the pass transistors. The HIP6521 monitors all the output voltages. The PWM controller’s adjustable overcurrent function monitors the output current by using the voltage drop across the upper MOSFET’s rDS(ON). The linear regulator outputs are monitored via the FB pins for undervoltage events.

The B55 Card Edge Type Ribbon Cable Connector HIF5 Series is a connector with the following features: 1. Product Variation: The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. 2. Mounting Density Enhancement: This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. 3. Applicable Cable: The applicable cable is a AWG#28 flat cable (7 pcs./0.127mm, jacket dia.: 0.8~1.0mm). It has characteristics such as voltage resistance, humidity resistance, and vibration resistance.

The HI-3588 is a silicon gate CMOS device from Holt Integrated Circuits for interfacing a Serial Peripheral Interface (SPI) enabled microcontroller to an ARINC 429 serial bus. The device provides one receiver with user-programmable label recognition for any combination of 256 possible labels, a 32 by 32 Receive FIFO and an analog line receiver. Receive FIFO status can be monitored using the programmable external interrupt pin, or by polling the HI-3588 Status Register. Other features include the ability to switch the bit-signifiance of ARINC 429 labels. The ARINC input pins are available with different input resis- tance values to provide flexibility when adding external lightning protection circuitry. The Serial Peripheral Interface minimizes the number of host interface signals allowing for a small footprint device which can be interfaced to a wide variety of industry- standard microcontrollers supporting SPI. Alternatively, the SPI signals may be controlled using just four general purpose I/O port pins from a microcontroller or custom FPGA. The SPI and all control signals are CMOS and TTL compatible and support 3.3V or 5V operation. The HI-3588 checks received data against ARINC 429 electrical, timing and protocol requirements. ARINC 429 databus timing comes from a 1 MHz clock input, or an internal counter can derive it from higher clock frequencies having certain fixed values, possibly the external host processor clock.

HES61 series AC/DC external desktop adapter features universal input and multiple output, 50-60 watt rated output power.