Industrial

This datasheet provides detailed information on the Marl International 515 series LED indicators, including voltage, current, luminous intensity, wavelength, operating temperature and storage temperature.

RGP10A THRU RGP10M Glass passivated junction fast switching rectifier. Reverse voltage is 50 to 1000 volts, and forward current is 1.0 amps.

The document describes the features and characteristics of a 105 Arrangement Contact Coil (polarized) product, including different contact forms, power ratings, operating temperature and humidity ranges, etc.

This document is the technical data manual of HDSP-AX11/-AX13 Series HDSP-FX11/-FX13 Series Black Surface Seven Segment Displays

This document introduces the MCP23016 from Microchip Technology Inc. It is a 16-bit remote bidirectional I/O port with a fast I2C bus clock frequency. It supports up to eight devices with three hardware address pins. Each I/O port has a high-current drive capability of ±25 mA. It features an open-drain interrupt output, interrupt port capture register, internal Power-On Reset (POR), and polarity inversion register. It is compatible with most microcontrollers.

This document describes the technical data and features of the 7.6 mm (0.3 inch) Micro Bright Seven Segment Displays, including compact packaging, choice of colors, excellent appearance, design flexibility, high light output, and high peak current.

The document describes the features and characteristics of the REF30xx series precision, low power, low dropout voltage references. The series is available in a tiny SOT23-3 package, making it ideal for portable and battery-powered applications. The series does not require a load capacitor but is stable with any capacitive load. All models are specified for the wide temperature range of -40°C to +125°C.

RB205T-90 is a Schottky barrier diode from ROHM that is designed for use in switching power supplies. It features a low forward voltage drop and high reliability. The diode has a rated current of 15 amps and a rated reverse voltage of 90 volts. It is packaged in a TO-220FN package.

The HDSP-5082 series of light emitting diode displays (LEDs) are industry standard size and feature 7.62mm (0.300 inch) DIP leads on 2.54mm (0.100 inch) centers. The products have a choice of colors (AlGaAs Red, High Efficiency Red, Yellow and Green), evenly lighted segments, ±50° viewing angle and optimum contrast. Products also feature design flexibility with a choice of common anode or common cathode, single digits, left or right hand decimal point, ±1. overflow character. Products also feature high light output, high peak current, excellent for long digit string multiplexing, intensity and color selection available and are sun light viewable.

The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. They feature on-chip protection, supply transient protection, reverse-battery protection, an on-board voltage regulator, and operate in the voltage range of 3.5V to 24V. They utilize chopper stabilization, exhibit low switchpoint drift over the operating temperature range, and have low stress sensitivity. They can be field-programmed to optimize switchpoints.

This document describes the features and characteristics of Microchip Technology Inc. 93LC46AX/BX series products, including single supply operation, low power CMOS technology, 128 x 8 bit or 64 x 16 bit organization, self-timed erase and write cycles, automatic erase before write, power on/off data protection circuitry, industry standard 3-wire serial interface, etc.

The document introduces the three SRAMs, CY7C1470V33, CY7C1472V33 and CY7C1474V33. They support 250MHz bus operation and have 3.3V/2.5V power supply. They also support single byte write operation.

The document describes the features and characteristics of the TK113xxB model, including high voltage precision, low dropout voltage, and low noise.

This document describes a product called 500 Watt Transient Voltage Suppressor (TVS). The product is available in the DO-213AB package and provides the highest level of Peak Pulse Power (PPP) in the industry. It offers protection from switching transients, induced RF, secondary lightning, as well as ESD or EFT. The product is compliant with IEC61000-4-2 and IEC61000-4-4 standards. It is available in both unidirectional and bidirectional configurations, with the bidirectional option having a C or CA suffix. The MELF package design prevents lead damage and reduces inductive parasitics for minimal transient voltage overshoots.