Industrial

This document describes the design and features of the 440 series connectors from Glenair, Inc. The connectors feature a rotatable coupling, split shell, and ultra-low profile.

The LVX541 is an octal non-inverting buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density. The inputs tolerate up to 7V allowing interface of 5V systems to 3V systems.

The SOLID TANTALUM TD series is a range of resin dipped tantalum capacitors designed for entertainment, commercial, and industrial equipment. They have sintered anodes and solid electrolyte. The epoxy resin housing is flame retardant with a limiting oxygen index in excess of 30 (ASTM-D-2863).

The LS 3340, LO 3340, LY 3340 LG 3330, LP 3340 VEX06710 series are a range of non-diffused 11.96 3 mm (T1) LEDs. This series of products features: colored, clear package, optical coupling into light pipes, for use as optical indicator, solder leads with stand-off, available taped on reel, load dump resistant acc. to DIN 40839.

BSS 80 BSS 82 are PNP type bipolar junction transistors. They feature high current gain, low collector-emitter saturation voltage, low saturation current and good thermal stability. They are ideal for low voltage, high power switching circuits.

The 74LCX257 is a quad 2-input multiplexer with 5V tolerant inputs and outputs, and 3-STATE outputs. It allows selection of four bits of data from two sources using a Common Data Select input. The selected data is presented in true (non-inverted) form through four outputs. The outputs can be switched to a high impedance state by applying a logic HIGH on the common Output Enable (OE) input, enabling direct interface with bus-oriented systems. The 74LCX257 is fabricated using advanced CMOS technology to achieve high-speed operation while maintaining low power dissipation.

The BB 639C is a silicon variable capacitance diode from Infineon, which is suitable for tuning of extended frequency band in VHF TV / VTR tuners.

The TC54 series CMOS voltage detector, with extremely low 1µA operating current and small surface-mount packaging, is especially suitable for battery-powered applications. Each part is laser trimmed to the desired threshold voltage, which can be specified from 2.1V to 6.0V, in 0.1V steps. The device includes a comparator, low-current high-precision reference, laser-trimmed divider, hysteresis circuit and output driver. The TC54 is available with either an open-drain or complementary output stage. In operation, the TC54's output (VOUT) remains in the logic HIGH state as long as VIN is greater than the specified threshold voltage (V–DET). When VIN falls below V–DET, the output is driven to a logic LOW. VOUT remains LOW until VIN rises above V–DET by an amount VHYST, whereupon it resets to a logic HIGH.

T409/T419/T429 Series is a military version of T497 Series. High Grade COTS Capacitance Values and Voltages as shown in following part number table.

This data sheet introduces the features and characteristics of gate-triggered triacs produced by Teccor Electronics. These triacs have current ratings from 0.8A to 35A and voltages from 200V to 1000V. These triacs are designed for AC switching and phase control applications such as speed and temperature modulation controls, lighting controls, and static switching relays. The triggering signal is normally applied between the gate and MT1.