Industrial

The M627XXML/SL is a low voltage detector designed for detection of a supply voltage and generation of a system reset pulse for almost all logic circuits such as microprocessor. It also has extensive applications including battery checking, level detecting and waveform shaping circuits.

M5M54R16AJ,ATP-10,-12,-15 is a family of 262144-word by 16-bit static RAMs, fabricated with the high performance CMOS process and designed for high speed application. These devices operate on a single 3.3V supply, and are directly TTL compatible. They include a power down feature as well.

The M54HC4538/M74HC4538 is a high performance CMOS bistable multivibrator fabricated in silicon gate C2MOS technology. It has the same high performance as LSTTL combined with true CMOS low power consumption. Each multivibrator features both a negative, A, and a positive, B, edge triggered input, either of which can be used as an inhibit input. Also included is a clear input that when taken low resets the one shot. The monostable multivibrators are retriggerable. That is, they may be triggered repeatedly while their outputs are generating a pulse and the pulse will be extended. Pulse width stability over a wide range of temperature and supply is achieved using linear CMOS techniques. The output pulse equation is simply PW = 0.7 (R)(C) where R is the output resistance and C is the output capacitance.

M54671SP is a stepper motor driver IC from Mitsubishi Electric that drives bipolar stepper motors directly by controlling the coil current with the constant current method. It features a wide output current control range of 20-1200mA and is built in a thermal shutdown circuit. It is used in office automation equipment such as printers, FDDs, HDDs, and FAXes.

This Application Note describes the performance comparison and benchmark of the Agilent 2200 TapeStation system with the Agilent 2100 Bioanalyzer system, the industry standard for RNA quality control. The 2200 TapeStation system performs automated analysis of up to 96 samples with approximate analysis time of 1 minute per sample. This Application Note demonstrates the high correlation between RINe generated by the 2200 TapeStation system with the RIN quality assessment of the 2100 Bioanalyzer system. The high reproducibility of RINe achieved with the 2200 TapeStation system in RNA quality assessment is also shown. The 2200 TapeStation system is, therefore, a reliable system for RNA quality control.

Gene expression analysis is currently carried out using three methods that provide complementary data: microarrays, RNA-Seq, and RT-qPCR. Microarrays provide comprehensive whole-genome coverage in single experiments, with rapid data acquisition and results at a low price per sample.

This application note demonstrates the concordance in the results achieved with identical oligonucleotide probes on two versions of Agilent miRNA microarrays [(AMADID 021827, release 12.0) and (AMADID 031181, release 16.0)], based on different revisions of the miRBase database and provided on different microarray formats. Since probes for a given microarray will remain constant for subsequent versions of Agilent SurePrint G3 Human miRNA microarrays, barring any miRBase sequence changes, it is necessary to confirm that the TotalGeneSignal achieved is consistent. The data show Agilent’s strength in probe reproducibility, a crucial factor for identifying miRNA of differential expression.

This applications note describes using VnmrJ 3 Software to set up advanced experiments to resolve overlapping homonuclear resonances. These tools allow even novice users to gain critical information about their research samples, using the most advanced NMR experiments available.

This application note describes a method for characterizing olive oil using Agilent GC/Q-TOF MS and Mass Profiler Professional software. The method can detect a large number of compounds in olive oil and perform quantitative analysis.

Solid-phase extraction (SPE) coupled with high-performance liquid chromatography (HPLC) was optimized for extraction and quantification of two fungicides (carbendazim and thiabendazole) in apple juice. Results indicate that SPE using Agilent Bond Elut SCX (60 mg, 3 mL) and HPLC using an Agilent ZORBAX Eclipse Plus C18 column (4.6 mm × 100 mm, 3.5 µm) is an excellent combination for extraction and analysis of these compounds. Recoveries ranged from 92.1 to 99.4 percent with RSDs below 5 percent and limits of detection of 4 µg/kg.

This application note describes the optimization of a rapid LC/MS/MS method for vitamin B related compounds (4-aminobenzoic acid, nicotinamide, riboflavin, and nicotinic acid) on an Agilent ZORBAX Rapid Resolution High Definition HILIC Plus column using an Agilent 1290 Infinity LC System with an Agilent 6410A Triple Quadrupole Mass Spectrometer. The method uses isocratic elution with an acetonitrile rich mobile phase and an ammonium acetate buffer. All analytes have good peak shape with this hydrophilic interaction chromatography (HILIC) application. The method is then used to demonstrate the importance of choosing an appropriate injection solvent when performing LC analyses in HILIC mode. Various injection solvents are investigated, including water, acetonitrile, methanol, and combinations. Of the solvents explored, it was determined that pure acetonitrile yields the best retention and peak shape for all compounds, with water being the worst solvent for analytical performance and peak shape.

Summary of the characteristics of M29F800DT M29F800DB 8 Mbit (1Mb x8 or 512Kb x16, Boot Block) 5V Supply Flash Memory.

This application note uses Agilent ZORBAX RRHD columns with UHPLC/MS to compare Morphine’s HILIC and RPLC. Both methods use acetonitrile/ammonium acetate buffer mobile phase for isocratic elution. The results show that HILIC mode allows for more sensitive MS detection due to more efficient spraying and desolvation in the ESI-MS source, as a result of the volatile acetonitrile rich mobile phase used.

This document describes the advantages and disadvantages of copper and molybdenum sources on a dual source SuperNova diffractometer, and compares the two sources in terms of data collection and data processing.