Industrial

The LTC1591/LTC1597 are pin compatible, parallel input 14-bit and 16-bit multiplying current output DACs that operate from a single 5V supply. INL and DNL are accurate to 1LSB over the industrial temperature range in both 2- and 4- quadrant multiplying modes. True 16-bit 4-quadrant multiplication is achieved with on-chip 4-quadrant multiplication resistors. These DACs include an internal deglitcher circuit that reduces the glitch impulse to less than 2nV-s (typ). The asynchronous CLR pin resets the LTC1591/LTC1597 to zero scale and LTC1591-1/LTC1597-1 to midscale. The LTC1591/LTC1597 are available in 28-pin SSOP and PDIP packages and are specified over the industrial temperature range. For serial interface 16-bit current output DACs refer to the LTC1595/LTC1596 data sheet.

LTC1258-3/LTC1258-4.1 are micropower bandgap references that combine high accuracy and low drift with very low supply current and small package size. The combination of ultralow quiescent current and low dropout voltage of only 200mV max makes them ideal for battery-powered equipment. These references uses curvature compensation to obtain low temperature coefficient and trimmed thin-film resistors to achieve high output accuracy. These references can supply up to 10mA and sink up to 2mA, making them ideal for precision regulator applications.

This datasheet provides detailed information on the LTC1096/LTC1096L/LTC1098/LTC1098L micropower sampling 8-bit serial I/O A/D converters, including: 80µA maximum supply current, 1nA typical supply current in shutdown state, 8-pin SO plastic package, 5V operation, 3V operation, sample and hold, 16µs conversion time, 33kHz sample rate, ±0.5LSB total unadjusted error over temperature, direct 3-wire interface to most MPU serial ports and all MPU parallel I/O ports

LTC1068 Series Clock-Tunable Quad Second Order Filter Building Blocks

LT6200/LT6201 are single and dual ultralow noise, rail-to-rail input and output unity gain stable op amps that feature 0.95nV/√Hz noise voltage. These amplifiers combine very low noise with a 165MHz gain bandwidth, 50V/µs slew rate and are optimized for low voltage signal conditioning systems.

Littelfuse fuse reducers allow smaller size fuses to be installed into existing fuse clips. This prevents overfusing. They allow lower ampere-rated fuses to be used in existing fuse clips. They are simple to install, reduce inventory requirements, and have silver brazed joints for maximum strength.

The LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators are developed on a CMOS process which allows low quies- cent current operation independent of output load current. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications.

This document is the datasheet of LNSK10 NTC thermistor. It mainly introduces the features, applications, packaging form, resistance range, power consumption and other information of the product.

The document is a datasheet of LNJ906W5BRX LED. It provides the product's absolute maximum ratings, electro-optical characteristics, lighting color, conventional part number, global part number, lens color, forward voltage, wavelength, forward current, luminous intensity, relative luminous intensity, duty cycle, pulse width, ambient temperature, etc.

This document describes the technical characteristics of a square LED, including the electrical parameters, optical characteristics, and absolute maximum ratings of red, green, and amber LEDs.

LM6118/LM6218 are monolithic fast-settling unity-gain-compensated dual operational amplifiers with ±20 mA output drive capability. The PNP input stage has a typical bias current of 200 nA, and the operating supply voltage is ±5V to ±20V. These dual op amps use slew enhancement with special mirror circuitry to achieve fast response and high gain with low total supply current. The amplifiers are built on a junction-isolated VIP™ (Verti- cally Integrated PNP) process which produces fast PNP’s that complement the standard NPN’s.

The LM6165 family of high-speed amplifiers delivers an excellent speed-power product with a speed of 300 V/µs and a gain bandwidth product of 725 MHz (stable for gains as low as +25) with only 5 mA of supply current. These amplifiers are built using National's VIP™ (Vertically Integrated PNP) process, which produces fast PNP transistors that are true complements to the already fast NPN devices. This advanced junction-isolated process provides high-speed performance without the need for complex and expensive dielectric isolation.

The LM4992 is a 420mW stereo cell phone audio amplifier designed by Texas Instruments for demanding applications in mobile phones and other portable communication device applications. It can deliver 1 watt per channel of continuous average power to an 8 ohm BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.

The LM111/211/311/LM311B are low-power precision voltage comparators from Philips Semiconductors. They feature input currents approximately 100 times lower than the µA710 and can operate from a single 3V supply. Their output is compatible with RTL, DTL, and TTL as well as MOS circuits. They can also drive lamps or relays, switching voltages up to 50V at currents as high as 50mA. Both the inputs and the outputs of the LM111 series can be isolated from system ground, and the output can drive loads referred to ground, the positive supply, or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire-ORed.