Industrial

This document describes the features and characteristics of the 74ABT16260/74ABTH16260 12-bit to 24-bit multiplexed D-type latches, including ESD protection, latch-up performance, VCC and GND pin configuration, high-drive outputs, etc.

The 74ABT16245B/74ABTH16245B is a 16-bit dual bus transceiver produced by Philips Semiconductors. It has 3-state buffer output, low switch noise and low power consumption.

This datasheet introduces the features and characteristics of the 74ABT16245 16-bit bidirectional buffer. The chip has 3-STATE outputs and is intended for bus applications. The chip has 16 non-inverting bidirectional buffers, each byte has a separate control input, which can be shorted together for full 16-bit operation. The T/R inputs determine the direction of data flow through the chip. The OE inputs can put the A and B ports into a high impedance state.

SN54ABT16244 and SN74ABT16244A are 16-bit buffers and line drivers specifically designed to improve the performance and density of 3-state memory address drivers, closed-loop control logic, and other high-speed applications.

74abt16244 is a 16-bit buffer/line driver with 3-state outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmit- ter/receiver.

The document describes the features and characteristics of the 74ABT16241A and 74ABTH16241A 16-bit buffer/driver (3-State), including 16-bit bus interface, 3-State buffers, output capability, TTL input and output switching levels, interface capability to systems at 5V supply, etc.

74ABT16240A 74ABTH16240A is a 16-bit inverting buffer/driver (3-State) with low static and dynamic power dissipation, high speed and high output drive. This device is an ideal driving bus lines of 16-bit inverting buffer. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-State outputs. Two options are available, 74ABT16240A which does not have the bus hold feature and 74ABTH16240A which incorporates the bus hold feature.

The SCBS239F is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. It features no external resistors required, low output ground bounce, distributed VCC and GND pins, and support for partial-power-down mode operation.

The 74ABT162245A is a 16-bit bidirectional bus transceiver with 30Ω series termination resistors (3-State). It features low static and dynamic power dissipation, high speed, non-inverting 3-State bus compatible outputs, easy cascading, and two direction control inputs.

The 74ABT162244 is a 16-bit buffer/line driver with 30Ω series termination resistors (3-State) produced by Philips Semiconductors. It has multiple VCC and GND pins to minimize switching noise. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-State outputs. The 74ABT162244 is designed with 30Ω series resistance in both the upper and lower output structures, which can reduce line noise in applications such as memory address drivers.

The ABT162244 is a 16-bit buffer/line driver that contains sixteen non-inverting buffers with 3-STATE outputs and 25-ohm series resistors. It can be used as a memory and address driver, clock driver, or bus-oriented transmitter/receiver. The device is nibble controlled, and individual 3-STATE control inputs can be shorted together for 8-bit or 16-bit operation. The 25-ohm series resistors in the outputs reduce ringing and eliminate the need for external resistors.

The 74ABT162240 is a high-performance BiCMOS device that combines low static and dynamic power dissipation with high speed. This device is an inverting 16-bit buffer that is ideal for driving bus lines. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-State outputs. Two options are available, 74ABT162240 which does not have the bus hold feature and 74ABTH162240 which incorporates the bus hold feature.

The 74ABT161543 and 74ABTH161543 are 16-bit latched transceivers with dual enable and master reset functions. They feature two sets of 8-bit octal transceivers with D-type latches for data storage in both directions. The product has multiple VCC and GND pins to minimize switching noise. It also has strong output capability, latch-up protection, and electrostatic discharge protection.

The document is about the product specification of Philips Semiconductors, specifically describing the features and characteristics of the 74ABT126 Quad buffer (3-State), including four output enables, 3-state buffers, live insertion/extraction, output capability, latch-up protection, ESD protection, power-up 3-state, etc.

74ABT126 is a Quad Buffer with 3-STATE Outputs produced by Fairchild Semiconductor Corporation. The buffer has non-inverting outputs, output sink capability of 64 mA, source capability of 32 m, guaranteed latchup protection, high impedance glitch free bus loading during entire power up and power down cycle, nondestructive hot insertion capability, disable time less than enable time to avoid bus contention.