Industrial

The TS80C52X2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. It retains all features of the TEMIC 80C51 with extended ROM/EPROM capacity (8 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/ counters. In addition, the TS80C52X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C52X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C52X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.

The TS2937 is a 500mA ultra low dropout fixed positive voltage regulator with an input voltage range of -18~+60V and an output voltage range of 12V, 10V, 8V, 5V, 3.3V and 2.5V. The typical output voltage is 0.6V. It has the characteristics of high output voltage accuracy, output current up to 500mA, low static current, and a working temperature range of -20~+85℃.

The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.

The TPS5102 is a dual, high efficiency controller designed for notebook system power requirements. Under light load conditions, high efficiency is maintained as the controller switches from the PWM mode to the lower frequency Skip mode. These two operating modes, along with the synchronous-rectifier drivers, dead-time, and very low quiescent current, allow power to be conserved and the battery life extended, under all load conditions. The resistor-less current protection and fixed high-side driver voltage simplify the system design and reduce the external parts count. The wide input voltage range and adjustable output voltages allow flexibility for using the TPS5102 in notebook power supply applications.

The TPR 400, produced by GHz Technology Inc., is a high-power transistor designed for pulsed systems in the frequency range of 1030-1090 MHz. It features gold thin-film metallization for proven high Mean Time to Failure (MTTF). The transistor includes an input prematch for broadband capability and has a low thermal resistance package to reduce junction temperature and extend its lifespan.

The TPA series are TRISIL devices, specially designed for protecting sensitive telecommunications equipment against lightning and transient voltages induced by AC power lines. They are available in the F126 axial package. TRISIL devices provide bidirectional protection by crowbar action. Their characteristic response to transient overvoltages makes them particularly suited to protect voltage sensitive telecommunications equipment.

This document describes the maximum ratings and electrical characteristics of the TMG5C80D TRIAC. It is a surface mount device, non-isolated. The main features include a maximum repetitive peak off-state voltage of 800V, a maximum RMS on-state current of 55A, a maximum surge on-state current of 12.6A, and an operating junction temperature range of -40℃ to +125℃.

The TLV2354, TLV2354Y is a four-channel differential comparator designed by Texas Instruments with low supply voltage, low power consumption, high input impedance and fast response time, suitable for single-supply applications

TLP620 is a N-channel MOSFET with a rated voltage of 100V and a rated current of 0.25A.

This datasheet describes the features and characteristics of the DM5406 and DM7406 hex inverting buffers.

DM7406 is a six-way inverting buffer produced by Fairchild Semiconductor Corporation, with high voltage open collector outputs

This document describes TL�F�6495 DM5405�DM7405 Hex Inverters with Open-Collector Outputs. The open-collector outputs require external pull-up resistors for proper logical operation.

This document is the DM7405 device product manual, which introduces the basic functions, characteristics, pin definitions, package forms, application circuits, etc. of the device.

This document describes the features and functions of the TL F6494 5404 DM5404 DM7404 six independent inverting gates.