Industrial

SN54ABT16541 and SN74ABT16541A are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals.

The document introduces the 74ABT16541 16-Bit Buffer/Line Driver manufactured by Fairchild Semiconductor Corporation. The device features sixteen non-inverting buffers with 3-STATE outputs, which can be used as a memory and address driver, clock driver, or bus-oriented transmitter/receiver. It has separate control logic for each nibble and can be operated in 8-bit or 16-bit mode. The device has high sink and source capability, guaranteed switching noise level and latchup protection, as well as glitch-free bus loading and non-destructive hot insertion capability.

This data sheet provides the features of the 74ABT16501A/74ABTH16501A, which is an 18-bit bidirectional bus transceiver with 3-state buffers, output capability of +64mA/-32mA, TTL input and output switching levels, power-up reset, power-up 3-state, positive edge-triggered clock inputs and so on.

The ABT16501 is an 18-bit universal bus transceiver that combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. It has control functions such as output enable, latch enable, and clock input.

The 74ABT16500C is a high-performance BiCMOS Device which combines low static and dynamic power dissipation with high speed and high output drive. This device is an 18-bit universal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device operates in the transparent mode when the CPAB input is high and the CPBA input is low. In this mode, the 74ABT16500C drives the outputs of the A-side bus with the data received on the A-side inputs. For B-to-A data flow, the device operates in the latched mode when the CPBA input is high and the CPAB input is low. In this mode, the outputs of the B-side bus are latched by the data received on the B-side inputs.

The ABT16500 18-bit universal bus transceiver combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes

SN54ABT16374A, SN74ABT16374A are 16-bit edge-triggered D-type bidirectional flip-flops with 3-state outputs specifically designed for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.

The ABT16374 is a 16-bit D-type flip-flop with 3-STATE outputs, designed for bus-oriented applications. The device features separate control logic for each byte, edge-triggered D-type inputs, buffered positive edge-triggered clock, high impedance glitch-free bus loading during the entire power up and power down cycle, non-destructive hot insertion capability, and guaranteed latch-up protection.

74ABT16373B is a 16-bit transparent latch (3-State) from Philips Semiconductors, which features multiple VCC and GND pins to minimize switching noise, power-up 3-State, live insertion/extraction permitted, power-up reset, 3-State output buffers, 74ABTH16373B incorporates bus-hold data inputs which eliminate the need for external pull-up resistors to hold unused inputs

SN54ABT16373A, SN74ABT16373A are 16-bit transparent D-type latches with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a n

The 74ABT16373 is a 16-bit transparent D-type latch with 3-STATE outputs, designed for bus oriented applications. It features separate control logic for each byte, high impedance glitch free bus loading, non-destructive hot insertion capability, and latch-up protection. The product provides high performance and reliability.

ABT162827A is a 20-bit non-inverting buffer from TI with independent output enable signals. The output ports have equivalent 25-ohm series resistors, so no external resistors are required. During power on and off, it is in the high impedance state. The typical VOLP (output ground bounce) is less than 1V at VCC=5V, TA=25°C. Distributed VCC and GND pins minimize high-speed switching noise. Ioff and power-up 3-state support hot insertion. The flow-through architecture optimizes PCB layout. Latch-up performance exceeds 500 mA per JEDEC Standard JESD-17. ESD protection exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A)

74ABT16273 74ABTH16273 is a 16-bit D flip-flop with +64mA/-32mA output capability, TTL input and output switching levels, live insertion/extraction permitted, power-up reset, 74ABTH16273 incorporates bus-hold data inputs that eliminate the need for external pull-up resistors to hold unused inputs, Latch-up protection exceeds 500mA per JEDEC Std 17, ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model standard.