Industrial

2N7371 is a PNP Darlington high power silicon transistor with a maximum rating voltage of 100V and a maximum collector current of 12A. The operating temperature range is -65 to +175 degrees.

The CS51220 is a single output PWM controller with switching frequency up to 500 kHz. The feed forward voltage mode control provides excellent line regulation for wide input range. This PWM controller has a synchronization output allowing programmable phase delay. For overcurrent protection, the “soft hiccup” technique effectively limits the output current with maximum flexibility. In addition, this device includes such features as: soft start, pulse–by–pulse current limit, programmable foldback current limit, volt–second clamping, maximum duty cycle, overvoltage and undervoltage protection, and synchronization input. The CS51220 is available in 16 SO narrow surface mount package.

The 2N7370 JAN series is a high power silicon transistor with a maximum collector-emitter voltage of 100Vdc, a maximum collector-emitter breakdown voltage of 100Vdc, a maximum emitter-base voltage of 5.0Vdc, a maximum base current of 0.2Adc, a maximum collector current of 12Adc, and a maximum total power dissipation of 100W. The operating temperature range is -65 to +175℃.

This document describes a PNP high power silicon transistor, qualified per MIL-PRF-19500/621 standard. It has a collector-emitter voltage of 80V, a collector-base voltage of 80V, an emitter-base voltage of 7.0V, a base current of 4.0A, a collector current of 10A, and a maximum power dissipation of 115W.

This document provides technical data for an NPN high power silicon transistor, including maximum ratings, thermal characteristics, and electrical characteristics.

This is a PDF document. It provides a list of suppliers for 2N7331D.

Query 2N7330H suppliers

CS51033 is a switching controller for use in dc-dc converters. It can be used in the buck topology with a minimum number of external components. The CS51033 consists of a 1.0 A power driver for controlling the gate of a discrete P-channel transistor, fixed frequency oscillator, short circuit protection timer, programmable Soft Start, precision reference, fast output voltage monitoring comparator, and output stage driver logic with latch. The high frequency oscillator allows the use of small inductors and output capacitors, minimizing PC board area and systems cost. The programmable Soft Start reduces current surges at start up. The short circuit protection timer significantly reduces the PFET duty cycle to approximately 1/30 of its normal cycle during short circuit conditions. The CS51033 is available in an 8-Lead SO package. Features • 1.0 A Totem Pole Output Driver • High Speed Oscillator (700 kHz max) • No Stability Compensation Required • Lossless Short Circuit Protection • 2.0% Precision Reference • Programmable Soft Start • Wide Ambient Temperature Range: ♦ Industrial Grade: -40°C to 85°C ♦ Commercial Grade: 0°C to 70°C 95 Units/Rail http://onsemi.com

CS51033 is a switching controller for use in DC-DC converters. It can be used in the buck topology and features a high-speed oscillator that does not require compensation, lossless short circuit protection, 2% precision reference, and programmable soft start.

This document introduces the radiation-hardened N-channel power MOSFETs, models 2N7288D, 2N7288R, and 2N7288H, produced by Harris Corporation in 1992. These devices have a rating of 9A and 250V, with an RDS(on) value of 0.415Ω. They meet the pre-radiation specifications up to 100KRAD(Si) and can be used up to 3000KRAD(Si) with limited performance.

2N7228 N-CHANNEL HIGH VOLTAGE POWER MOSFETs are high voltage power MOSFETs produced by ON Semiconductor, USA, with a maximum voltage of 500V and a maximum current of 12A.

2N7227 is a high voltage power MOSFET with maximum working voltage of 400V. Its maximum continuous current is 14A and maximum peak current is 56A. Its on-state resistance is 0.315Ω

The CS51031 is a switching controller for use in DC–DC converters. It can be used in the buck topology with a minimum number of external components. The CS51031 consists of a VCC monitor for controlling the state of the device, 1.0 A power driver for controlling the gate of a discrete P–channel transistor, fixed frequency oscillator, short circuit protection timer, programmable soft start, precision reference, fast output voltage monitoring comparator, and output stage driver logic with latch. The high frequency oscillator allows the use of small inductors and output capacitors, minimizing PC board area and systems cost. The programmable soft start reduces current surges at start up. The short circuit protection timer significantly reduces the duty cycle to approximately 1/30 of its cycle during short circuit conditions. The CS51031 is available in an 8 Lead SO plastic package.

CS51031 is a switching controller for use in DC-DC converters. It can be used in the buck topology with a minimum number of external components. The CS51031 consists of a VCC monitor for controlling the state of the device, 1.0A power driver for controlling the gate of a discrete P-channel transistor, fixed frequency oscillator, short circuit protection timer, programmable soft start, precision reference, fast output voltage monitoring comparator, and output stage driver logic with latch. The high frequency oscillator allows the use of small inductors and output capacitors, minimizing PC board area and systems cost. The programmable soft start reduces current surges at start up. The short circuit protection timer significantly reduces the duty cycle to approximately 1/30 of its cycle during short circuit conditions. The CS51031 is available in 8L SO and 8L PDIP plastic packages.