Industrial Manuals

The document is the specification of ADG3246, which introduces the features of ADG3246, including 225 ps propagation delay, 4.5 ohm switch connection, 1.244 Gbps data rate, 2.5 V/3.3 V supply operation, selectable level shifting/translation, 610 MHz small signal bandwidth, 3.3 V to 2.5 V, 3.3 V to 1.8 V, 2.5 V to 1.8 V, 24-lead TSSOP and LFCSP packages.

The ADG3245 is a 2.5 V or 3.3 V, 8-bit, 2-port digital switch designed by Analog Devices. It is manufactured using Analog Devices' low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance, allowing inputs to be connected to outputs without affecting signal integrity.

This datasheet provides details on the features and applications of the ADG3257 device. The device is a CMOS bus switch comprised of four 2:1 multiplexers/demultiplexers with high impedance outputs. The device is manufactured on a CMOS process, which provides low power dissipation, high switching speed, and very low power consumption.

The ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage digital system applications, such as data transfer, between a low voltage ASIC level translation, smart card readers, cell phones and cell phone cradles, portable communications devices, telecommunications equipment, network switches and routers, storage systems (SAN/NAS), computing/server applications, GPS, and low cost serial interfaces.

ADG3308/ADG3308-1 are bidirectional level translators containing eight bidirectional channels. They can be used in multivoltage digital system applications. Features include bidirectional logic level translation, operating voltage range of 1.15V to 5.5V, low quiescent current <1μA, etc.

The ADG3301 is a single-channel, bidirectional logic level translator. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device.

This document is the datasheet of ADG3300 product, which introduces the characteristics of the product, including bidirectional level translation, operating voltage range 1.15V to 5.5V, low static current < 1μA, no direction pin, etc.

ADG3233 is a low voltage 1.65V to 3.6V bidirectional logic level translation, bypass switch from Analog Devices

The ADG3232 is a low voltage 2-1 mux, level translator designed on a sub-micron process and operates from supplies as low as 1.65 V. The device is guaranteed for operation over the supply range 1.65 V to 3.6 V. It operates from two supply voltages, allowing bidirectional level translation, i.e., it translates low voltages to higher voltages and vice versa. The signal path is unidirectional, meaning data may flow only from A to Y. This type of device may be used for level translation, low voltage ASIC translation, low voltage clock switching and serial interface translation.

ADG3231 is a single-channel level translator designed on a submicron process that is guaranteed to operate over the 1.65 V to 3.6 V supply range. The device can be used in applications requiring communication between digital devices operating from multiple supply voltages. The logic levels on each side of the device are set by the two supply voltages, VCC1 for A and VCC2 for Y. The signal path is unidirectional.

The ADG3123 is an 8-channel, noninverting CMOS to high voltage level translator. It operates in the input voltage range of 2.3V to 5.5V and provides output voltage levels from -24.4V to +35V. The device features low power consumption, fast rise/fall time, propagation delay, and is suitable for low voltage to high voltage translation applications such as TFT-LCD panels and piezoelectric motor drivers.

ADM2209E is an EMI-/EMC-compliant dual RS-232 port chip with 15 kV ESD protection. It includes two complete serial ports, six drivers, and ten receivers, and can be used with 3V or 5V logic. The chip features low power CMOS design with less than 5mA operation current and 100uA standby current. It also has a data rate of 460 kbit/s, guaranteed Laplink compatibility, and can be active in standby mode. The chip complies with the 89/336/EEC EMC directive, has ESD protection of 8kV contact discharge and 15kV air-gap discharge according to IEC1000-4-2 (801.2), and meets the electrical fast transient (EFT) immunity specified in IEC1000-4-4 and low EMI emissions specified in EN55022. It is suitable for applications such as personal computers, printers, peripherals, and modems.

The ADM5170 is an octal line driver suitable for digital communi- cation systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels.

The AD7306 is a +5 V powered RS-232/RS-422 transceiver from Analog Devices. It features single +5 V supply, 0.1 µF capacitors, short circuit protection, excellent noise immunity, low power BiCMOS technology and high speed, low skew RS-422 operation. It is suitable for applications such as DTE-DCE interface, packet switching, local area networks, data concentration, data multiplexers, and Integrated Services Digital Network (ISDN).

The ADM5180 is an octal differential line receiver suitable for a wide range of digital communication systems with data rates up to 200 kB/s. Input signals conforming to EIA Standards 232-E, 422A and CCITT V.10, V.11, V.28, X.26, and X.27 are accepted and translated into TTL /CMOS output signal levels. The ADM5180 is a superior upgrade for the UC5180C and the NE5180. It is fabricated on an advanced BiCMOS process, allowing high speed bipolar circuitry to be combined with low power CMOS circuitry.