Industrial Manuals

The AD75019 is a 16×16 array of 256 analog switches. It features a wide signal range, low on-resistance, and TTL/CMOS/microprocessor-compatible control lines.

The ADM1485 is a 5V low power EIA RS-485 transceiver that supports 30Mbps data rate and a -7V to +12V bus common-mode range. It has thermal shutdown protection and short-circuit protection. The driver propagation delay is 10ns and the receiver propagation delay is 15ns.

The ADM1486 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission, complies with EIA Standards RS-485 and RS-422, and is recommended for PROFIBUS applications.

The ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and features high speed, low power BiCMOS technology.

The ADM1487 is an ultra-low power RS-485/RS-422 transceiver consisting of one driver and one receiver per package. Quiescent operating current is typically 80µA and 1µA in shutdown mode. The driver and receiver both have three-state outputs. This allows multiple drivers to be connected to an RS-485/RS-422 bus, or several receiver outputs to be connected to a serial data bus. The driver will maintain a high-impedance output state even with power off, while the receiver features fail-safe operation that guarantees a logic high output if the inputs are left open-circuit. The device has slew-rate limited drivers to minimize electromagnetic interference (EMI) and reduce reflections caused by incorrectly terminated cables.

The ADM485E/ADM487E/ADM1487E are 5V low power data transceivers with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. They are designed for communication based on the TIA/EIA RS-485/RS-422 standard and have data transfer rates of 250 kbps (ADM487E) and 2.5 Mbps (ADM485E/ADM1487E). Additionally, they feature reduced slew rates for low electromagnetic interference, a common-mode input range of -7V to +12V, thermal shutdown, and short-circuit protection.

This PDF document is about the introduction of ADM4850-ADM4857 series products, including product features, characteristics, application scenarios, etc.

This datasheet introduces the ADM483E, a 5V low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. This datasheet provides detailed information on the features and specifications of the ADM483E, including operating voltage, data rate, common-mode voltage range, number of nodes, supply current, and shutdown current.

This document introduces the features and characteristics of the ADM488/ADM489 products, including meeting EIA RS-485 and RS-422 standards, 250kbps data rate, single 5V±10% supply, -7V to +12V bus common-mode range, 12kΩ input impedance, 2kV EFT protection, high EM immunity, reduced slew rate, short-circuit protection, excellent noise immunity, and 30μA supply current.

The ADM3493 is a 3.3V Slew Rate Limited, Half Duplex RS-485/RS-422 Transceiver. It operates with low power consumption and reduced electromagnetic interference, making it suitable for low power RS-485 applications and EMI sensitive systems.

This datasheet introduces the features and applications of Analog Devices ADM3485E 12Mbps ESD protected RS-485/RS-422 transceiver.

This document introduces the characteristics and features of the ADM3483E/ADM3486E/ADM3488E/ADM3490E/ADM3491E series 3.3 V, ±15 kV ESD-Protected, Half- and Full-Duplex, RS-485/RS-422 Transceivers products.

ADM3483/ADM3485/ADM3488/ADM3490/ADM3491 are low power, 3.3V supply RS-485/RS-422 transceivers that are interoperable with 5V logic and compliant with EIA RS-422 and RS-485 standards over the full common-mode range. The products offer multiple data rate options and support both half-duplex and full-duplex modes. ADM3483 and ADM3488 have reduced slew rates for low electromagnetic interference. In shutdown mode, ADM3483/ADM3485/ADM3491 have a supply current of only 2nA. Up to 32 transceivers can be supported on the bus, with a bus common-mode range of -7V to +12V. The products are suitable for low power RS-485/RS-422 applications such as telecom, industrial process control, and HVAC.

ADM3070E/ADM3071E/ADM3072E/ADM3073E/ADM3074E/ADM3075E/ADM3076E/ADM3077E/ADM3078E are Analog Devices 3.3 V, ±15 kV ESD-Protected, Half- and Full-Duplex, RS-485/RS-422 Transceivers that comply with TIA/EIA RS-485/RS-422 standard.

ADN4668 is a 3 V LVDS Quad CMOS differential line receiver with features such as high ESD protection, high-speed data transmission, and low power design. The product is suitable for applications such as point-to-point data transmission, multidrop buses, and clocks.