MOTOROLA Manuals

This datasheet provides the data of MC10E/100E122, including pinout, electrical characteristics, package etc.

MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. An internally generated reference supply (VBB) is available for single-ended reception. It has a maximum propagation delay of 500ps, VBB supply output, dedicated VCCO pin for each receiver, extended 100E VEE range of -4.2V to -5.46V, and 75kΩ input pulldown resistors.

This is a summary of the MC10E/100E112 datasheet. It is a quad driver with two pairs of OR/NOR outputs from each gate, and a common, buffered enable input. The device can be used as an ECL memory address fan-out driver, or as a clock driver, although the MC10E/100E111 is specifically designed for this purpose, and offers lower skew than the E112. For memory address driver applications where scan capabilities are required, please refer to the E212 device.

The MC10E/100E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signal is fanned out to 9 identical differential outputs. An enable input is also provided. A HIGH disables the device by forcing all Q outputs LOW and all Q outputs HIGH.

The MC10E/100E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signal is fanned out to 9 identical differential outputs. An enable input is also provided. A HIGH disables the device by forcing all Q outputs LOW and all Q outputs HIGH.

The MC10E/100E107 is a quint 2-input XOR/XNOR gate. The function output F is the OR of all five XOR outputs, while F is the NOR. If only the F outputs are to be used, the Q outputs need not be terminated.

The MC10E/100E104 is a quint 2-input AND/NAND gate from Motorola that has a maximum propagation delay of 600ps and can output OR and NOR logic levels.

The MC10E/100E101 is a quad 4-input OR/NOR gate.

This data sheet is about BCW60ALT1/D, which is a NPN silicon small signal transistor with a maximum collector-emitter voltage of 32Vdc, a maximum collector-base voltage of 32Vdc, a maximum emitter-base voltage of 5.0Vdc and a maximum collector current of 100mAdc.

The LP2950 and LP2951 are micropower voltage regulators that are specifically designed to maintain proper regulation with an extremely low input–to–output voltage differential. These devices feature a very low quiescent bias current of 75 µA and are capable of supplying output currents in excess of 100 mA. Internal current and thermal limiting protection is provided. The LP2951 has three additional features. The first is the Error Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power–on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown function that can be used to disable the device.

The TDA1085C is a phase angle triac controller with all the necessary functions for universal motor speed control in washing machines. It operates in closed loop configuration and provides two ramp possibilities.

This document mainly introduces the maximum ratings, thermal characteristics and electrical characteristics of Motorola's NPN silicon transistors

The LM317 is an adjustable 3-terminal positive voltage regulator capable of supplying in excess of 1.5 A over an output voltage range of 1.2 V to 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow-out proof. The LM317 serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM317 can be used as a precision current regulator.

ICminer Electronic Library Service

This datasheet is about Motorola bipolar power transistors, including models, maximum ratings, etc.