Analog Devices Manuals

AD9221/AD9223/AD9220 are complete 12-bit 1.5/3.0/10.0 MSPS monolithic A/D converters with low power, low noise, high accuracy and high dynamic range.

AD5410/AD5420 is a single-channel, 12-/16-bit, serial input, 4 mA to 20 mA current source DAC. It features 12-/16-bit resolution and monotonicity, current output ranges of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA, flexible serial digital interface, on-chip output fault detection, and on-chip reference voltage.

The AD600/AD602 are dual channel, low noise, variable gain amplifiers. The AD600 has a gain range of 0 to 40 dB and the AD602 has a gain range of -10 to 30 dB. They feature accurate absolute gain, low input noise, low distortion, high bandwidth, stable group delay and low power.

The ADR390/ADR391/ADR392/ADR395 are Micropower, Low Noise Precision Voltage References with Shutdown from Analog Devices.

The AD7237A/AD7247A is a dual 12-bit DAC on a single chip. It features two 12-bit CMOS DACs, on-chip voltage reference, output amplifiers and reference buffer amplifiers. It supports 12V to 15V operation, single or dual supply operation, and has a low power consumption of 165mW. It supports 8-bit or 16-bit parallel interface

The AD7674 is a 18-bit, 2.5 LSB INL, 800 kSPS SAR ADC that provides high speed 800 kSPS sampling and up to 103 dB of dynamic range in a single 5 V supply operation. The AD7674 also features a pin-to-pin compatible upgrade of AD7676, AD7678, and AD7679 for applications requiring 18-bit resolution and 800 kSPS sampling.

A-V EZ-Extender is a product released by Analog Devices. It can be connected to the Blackfin ADSP-BF537 EZ-KIT Lite development board and provide A/V interface, which allows developers to use A/V devices to test ADSP-BF537 EZ-KIT Lite

The AD9858 is a direct digital synthesizer (DDS) featuring a 10-bit DAC output. It has an internal clock speed of 1 GSPS and supports up to a 2 GHz input clock (selectable divide-by-2). The device integrates a 10-bit D/A converter and has a phase noise of less than 145 dBc/Hz @ 1 kHz offset. The output frequency is 100 MHz (DAC output) and it has a 32-bit programmable frequency register. It supports a simplified 8-bit parallel and SPI serial control interface and has automatic frequency sweeping capability. The device operates on a 3.3 V power supply with a typical power dissipation of 2 W. It also integrates a programmable charge pump and phase frequency detector with a fast lock circuit. The charge pump supply can be isolated up to 5 V. Additionally, the AD9858 integrates a 2 GHz mixer.

This document describes the features and characteristics of Analog Devices' 15 MHz Rail-to-Rail operational amplifiers OP162/OP262/OP462, including wide bandwidth, low offset voltage, low noise, single-supply operation, rail-to-rail output swing, etc. The product is suitable for applications such as portable instrumentation, sampling ADC amplifier, wireless LANs, direct access arrangement, and office automation.

AD5334/AD5335/AD5336/AD5344 is a low power parallel interface voltage output 8/10/12-bit DACs produced by Analog Devices.

AD623 is a single-supply, rail-to-rail, low-cost instrumentation amplifier. It is easy to use and offers higher performance than discrete designs. It can operate on single or dual supplies and provides rail-to-rail output swing. The input voltage range extends 150 mV below ground for single supply operation. It has low power consumption with a maximum supply current of 550 μA. The gain can be set with one external resistor and the gain range is from 1 (no resistor) to 1000. It offers high accuracy DC performance with a gain accuracy of 0.10% (G = 1) and 0.35% (G > 1), and a maximum gain drift of 10 ppm (G = 1). The input offset voltage is maximum 200 μV (AD623A) with a maximum input offset drift of 2 μV/°C (AD623A). For AD623B, the maximum input offset voltage is 100 μV with a maximum input offset drift of 1 μV/°C. The maximum input bias current is 25 nA. The noise is 35 nV/√Hz RTI noise @ 1 kHz (G = 1). It also provides excellent AC performance with a minimum CMRR of 90 dB (G = 10) and 70 dB (G = 1) at 60 Hz.

The AD7804/AD7808 are quad/octal 10-bit digital-to-analog converters, with serial load capabilities, while the AD7805/AD7809 are quad/octal 10-bit digital-to-analog converters with parallel load capabilities. These parts operate from a +3.3 V to +5 V (±10%) power supply and incorporates an on-chip reference. These DACs provide output signals in the form of VBIAS ± VSWING. VSWING is derived internally from VBIAS. On-chip control registers include a system control register and channel control registers. The system control register has control over all DACs in the package. The channel control registers allow individual control of DACs. The complete transfer function of each individual DAC can be shifted around the VBIAS point using an on-chip Sub DAC. All DACs contain double buffered data inputs, which allow all analog outputs to be simultaneously updated using the asynchronous LDAC input.

ADIS16209 is a high-accuracy, dual-axis digital inclinometer and accelerometer from Analog Devices

ADG408/ADG409 are high-performance 4/8-channel analog multiplexers with low power consumption, low on resistance, and fast switching speed. They can be widely used in audio and video routing, automatic test equipment, data acquisition systems, battery-powered systems, sample-and-hold systems, and communication systems.

AD5066 is a low power, 16-bit quad-channel, unbuffered voltage output nanoDAC offering relative accuracy, low total unadjusted error and low zero code error.