Analog Devices Manuals

This document is ADG3304 datasheet, which introduces the function, characteristics, application scenarios of ADG3304.

The ADT7470 is a multi-channel temperature sensor and fan controller that can monitor up to 10 remote temperature sensors and independently monitor and control the speed of up to 4 fans. PWM outputs drive each fan under software control. FULL_SPEED input allows fans to be blasted PWMMAX by external hardware. SMBALERT interrupt signals failures to system controller. Three-state ADDR pin allows up to 3 devices on a single bus. Temperature decoder interprets TMP05/TMP06 temperature sensors and communicates values over I2C bus. Supports fast I2C standard (max 400 kHz). Meets SMBus 2.0 electrical specifications (fully SMBus 1.1-compliant). Footprint-compatible with ADT7460. Applications include servers, networking and telecommunications equipment, and desktops.

AD7701 is a 16-bit ADC from AD company, with 0.0015% linearity error, 0.1Hz to 10Hz programmable low-pass filter, 0V to +2.5V or -2.5V analog input range, 4kSPS output data rate, flexible serial interface, ultralow power

The AD8221 precision instrumentation amplifier is an easy-to-use instrumentation amplifier with a gain range of 1 to 1000, available in a space-saving MSOP package. It offers excellent AC specifications, low noise, and high accuracy dc performance.

This datasheet provides detailed information on the features and specifications of the AD7824/AD7828, including the operating principles, pin functions, electrical characteristics and application examples.

AD8531/AD8532/AD8534 is a single-supply amplifier with a 250mA output current. The amplifier features 2.7V to 6V single-supply voltage range, 3MHz bandwidth and 5V/μs slew rate. It is suitable for audio, LCD driver, ASIC input or output amplifier and headphone driver applications

AD669 is a monolithic 16-bit D/A converter with on-board reference and output amplifier. It is manufactured on Analog Devices’ BiMOS II process, providing 16-bit parallel input, double-buffered latches, low jitter, low distortion and other functions.

AD627 is a micropower, single-supply and dual-supply rail-to-rail instrumentation amplifier produced by Analog Devices

The AD8517 is a 7 MHz rail-to-rail low voltage operational amplifier designed for single supply operation. It features wide bandwidth, low offset voltage, rail-to-rail output and input, and low power consumption.

The AD9857 is a 200 MHz 14-bit digital upconverter produced by Analog Devices. It has a 4× to 20× programmable reference clock multiplier, an internal 32-bit quadrature DDS, FSK function, 8-bit output amplitude control, a single pin power-down function, four programmable, pin-selectable signal profiles, SIN(x)/x correction (inverse SINC function), a simplified control interface, 10 MHz serial, 2-wire or 3-wire SPI compatible, 3.3 V single supply, single-ended or differential input reference clock, 80-lead LQFP surface-mount packaging, three modes of operation: quadrature modulator mode, single-tone mode, interpolating DAC mode, and is mainly used in HFC data, telephony and video modems, wireless base station, Agile, L-Band satellite communication and other applications.

The ADT7476A is a dBCOOL controller that can monitor up to five voltages, control and monitor up to four fans, and has high and low frequency fan drive signals. It has an on-chip temperature sensor, two remote temperature sensors, a temperature measurement range of up to 191°C, an automatic fan speed control mode that controls system cooling based on the measured temperature, an enhanced acoustic mode that significantly reduces user perception of changing fan speeds, a thermal protection feature via the THERM output, monitoring of the performance impact of the Intel® Pentium® 4 processor, a thermal control circuit via the THERM input, support for 3-wire and 4-wire fan speed measurement, and limit comparison of all monitored values. All TACH and PWM channels support 5V, and meet the SMBus 2.0 electrical specifications.

The ADG1204 is a low capacitance, low charge injection, ±15 V/+12 V 4:1 iCMOS™ Multiplexer, featuring 1.5 pF off source capacitance and <1 pC charge injection, and is suitable for use in automatic test equipment, data acquisition systems, battery-powered systems, sample-and-hold systems, audio signal routing, video signal routing and communication systems.

The AD8631/AD8632 is a single supply 1.8V to 6V, 5MHz bandwidth low power operational amplifier. It is available in SOT-23 and SOIC packaging.