Analog Devices Manuals

AD8036/AD8037 have large-signal bandwidths and ultralow distortion. The AD8036 achieves –66 dBc at 20 MHz, and has small-signal and large-signal bandwidths of 240 MHz and 195 MHz, respectively. The AD8036/AD8037 are ideal for driving and buffering flash and high resolution ADCs. The input clamp architecture supports the clamp levels as additional inputs to the amplifier. Due to these clamp characteristics, the AD8036 and AD8037 can be used in nontraditional applications such as a full-wave rectifier, a pulse generator, or an amplitude modulator.

AD7226 is an 8-bit D/A converter produced by Analog Devices. This converter has high accuracy, low power consumption, programmable, full speed, and is suitable for various applications.

The SSM2018T is a professional audio quality VCA designed for high performance volume control systems. It features a 117 dB dynamic range, 0.006% typical THD+N, 140 dB gain range, and more.

AD5301/AD5311/AD5321 are buffered voltage output 8/10/12-bit DACs from Analog Devices. They support 2.5 V to 5.5 V power supply, operate at 120 mA current, offer I2C®-compatible serial interface, provide data readback capability, have guaranteed monotonicity, low power, power supply derived reference, power-on reset to 0 V, on-chip rail-to-rail output buffer amplifier, and three power-down functions.

The ADP5022 is a small, high performance, 3 MHz, 600 mA buck regulator with integrated 150 mA low dropout (LDO) regulator

The document describes the features and characteristics of the AD7708/AD7718 8-/10-Channel, Low Voltage, Low Power, 24-Bit ADCs.

The AD8203 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range extends from -6 V to +30 V at a typical supply voltage of 5 V. The AD8203 is available in die and packaged for use in a variety of applications, such as transmission control, diesel injection control, engine management, adaptive suspension control, and vehicle dynamics control.

REF19x series precision micropower low dropout voltage reference

The AD526 is a single-ended, monolithic software programmable gain amplifier (SPGA) that provides gains of 1, 2, 4, 8, and 16. It is complete, including amplifier, resistor network, and TTL-compatible latched inputs, and requires no external components. Low gain error and low nonlinearity make the AD526 ideal for precision instrumentation applications requiring programmable gain. The small signal bandwidth is 350 kHz at a gain of 16. In addition, the AD526 provides excellent dc precision. The FET-input stage results in a low bias current of 50 pA.

Blackfin and the Blackfin logo are registered trademarks of Analog Devices, Inc. The Blackfin Embedded Processor ADSP-BF538/ADSP-BF538F Rev. 0 is provided by Analog Devices. The processor features high performance, multiple MAC and ALU units, a RISC-like register and instruction model for ease of programming, and advanced debugging, tracing, and performance monitoring capabilities.

AD5627R/AD5647R/AD5667R is a low power dual nanoDAC with 12-bit/14-bit/16-bit resolution, built-in 1.25V/2.5V, 5ppm/°C reference voltage, external reference voltage is also supported, operating voltage is 2.7V to 5.5V, ensures the design monotonicity, power-on reset to zero scale, each channel can be independently shut down, with hardware LDAC and CLR functions, I2C-compatible serial interface supports standard (100kHz), fast (400kHz) and high speed (3.4MHz) modes, can be applied to process control, data acquisition systems, portable battery powered instruments and other occasions.

The AD5204/AD5206 is a 4/6-channel digital potentiometer with 256 positions and independent programming. It can replace mechanical potentiometers and has features such as 10kΩ, 50kΩ, 100kΩ, 3-wire SPI-compatible serial data input, +2.7V to +5.5V single supply, -2.7V dual supply, power ON midscale preset.

AD5426/AD5432/AD5443 is a high bandwidth 8-bit, 10-bit and 12-bit multiplying DAC with serial interface

AD9411 is a 10-bit, 170/200 MS/s 3.3V A/D converter with excellent linearity and low power consumption, suitable for wireless and wired broadband communications, cable reverse path, communication test equipment, radar and satellite subsystems, etc.

AD5390/AD5391/AD5392 are 8/16-channel, 3 V/5 V, serial input, single-supply, 12/14-bit voltage output DACs from Analog Devices. AD5390 is a 16-channel, 14-bit voltage output DAC, AD5391 is a 16-channel, 12-bit voltage output DAC, and AD5392 is an 8-channel, 14-bit voltage output DAC. These devices feature guaranteed monotonicity, output voltage range of ±1 V to +5 V, and a temperature range of -40°C to +85°C.