Analog Devices Manuals

The AD1990 is a 2-channel, bridge tied load (BTL), switching audio power amplifier with integrated Σ-Δ modulator. The modulator accepts a single-ended, analog input signal and converts it to a switching waveform to drive speakers directly. A digital, microprocessor-compatible interface provides control of reset, mute, and PGA gain, as well as feedback signals for thermal and overcurrent detection.

This datasheet provides a comprehensive overview of the features and capabilities of the ADM1062, including the 10 supply fault detectors, 5 selectable input attenuators, 5 dual-function inputs, 10 programmable output drivers, and the sequencing engine (SE).

AD7143 is a programmable capacitive touch sensor controller with 8 analog input channels, providing 25ms touch update rate, resolution up to 1fF, automatic calibration and environmental compensation, integrated I2C bus interface, power supply voltage of 2.6V to 3.6V.

The document describes the features and characteristics of the Analog Devices OP471, a high-speed, low-noise quad operational amplifier. It includes excellent speed, low noise, high gain bandwidth, low input offset voltage and drift, and more.

The ADM1021 is a low cost microprocessor system temperature monitor with the following features: Replacement for MAX1617; On-Chip and Remote Temperature Sensing; No Calibration Necessary; 1°C Accuracy for On-Chip Sensor; 3°C Accuracy for Remote Sensor; Programmable Conversion Rate and Delay; Support Programmable Alerts; Support Programmable Interrupts; SMBus Bus Interface.

AD8055/AD8056 are low cost 300MHz voltage feedback amplifiers with single/dual channels, easy-to-use voltage feedback architecture, bandwidth up to 300MHz, 1400V/µs slew rate, 20ns settling to 0.1%, low distortion(-72dBc@10MHz), low noise(6nV/√Hz), low DC errors(5mV Max VOS, 1.2µA Max IB), small size(AD8055 is SOT-23-5, AD8056 is 8-Lead MSOP), excellent video specifications(RL=150Ω, G=+2), gain flatness 0.1dB to 40MHz, 0.01% differential gain error, 0.02° differential phase error, drive 4 video loads(37.5V), low power(-5V supply), 5mA typical/amplifier power supply current, high output drive current(over 60mA).

ADM1033 Rev. 0 is a thermal monitor and fan speed controller with 1 local and 1 remote temperature channel. It features automatic series resistance cancellation on remote temperature channels, fast measurement rate of up to 64 measurements per second, compliance with SMBus 2.0, 1.1, and 1.0 standards, programmable over-/undertemperature limits, programmable fault queue, fan speed controller with look-up table for temperature-to-fan-speed control, and various inputs and outputs for therm and fan fault.

AD815 is a high output current differential driver from TI, with flexible configuration, high output power, low distortion and high speed.

The AD420 is a complete digital to current loop output converter designed to meet the needs of the industrial control market. It provides a high precision, fully integrated, low cost single-chip solution for generating current loop signals in a compact 24-lead SOIC or PDIP package. The output current range can be programmed to 4 mA–20 mA, 0 mA–20 mA or 0 mA–24 mA.

AD8339 is a DC to 50MHz quad I/Q demodulator and phase shifter.

The AD8055/AD8056 is a low-cost, 300 MHz voltage feedback amplifier with an easy-to-use voltage feedback architecture, high speed, low distortion, low noise and low DC errors.

The AD624 is a high precision, low noise, instrumentation amplifier designed primarily for use with low level transducers, including load cells, strain gauges and pressure transducers. An outstanding combination of low noise, high gain accuracy, low gain temperature coefficient and high linearity make the AD624 ideal for use in high resolution data acquisition systems.

ADSP-21065L is a high-performance signal computer for communications, audio, automotive, instrumentation, and industrial applications. It features a Super Harvard Architecture Computer (SHARC®) with four independent buses for dual data, instruction, and I/O fetch on a single cycle. It supports 32-bit fixed-point arithmetic, 32-bit and 40-bit floating-point arithmetic. The product has 544 Kbits of on-chip SRAM memory and integrated I/O peripheral with I2S support for eight simultaneous receive and transmit channels. It offers 66 MIPS, 198 MFLOPS peak, and 132 MFLOPS sustained performance. It also includes user-configurable 544 Kbits on-chip SRAM memory, two external port DMA channels, eight serial port DMA channels, SDRAM controller, and more.

The OP90 is a high performance, micropower op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. The input voltage range includes the negative rail allowing the OP90 to accommodate input signals down to ground in a single-supply operation. The OP90’s output swing also includes a ground when operating from a single-supply, enabling “zero-in, zero-out” configurations.