Key facts
Start here

EIKI LC-XG110/LC-XG210 Multimedia Projector Owner's Instruction Manual
This document serves as the Owner's Instruction Manual for the EIKI LC-XG110 and LC-XG210 multimedia projectors. It covers essential safety precautions, setup procedures including power connection and positioning, and detailed instructions for connecting to various computer and video equipment. The guide explains how to operate the projector using the remote control unit and on-screen menu system to adjust picture settings such as zoom, focus, and keystone correction.
Read onlineEIKI LC-XG110 specifications
| Display panel | 0.99" TFT active‑matrix, 3‑panel |
|---|---|
| Weight | 17.2 lbs (7.8 kg) |
| Dimensions (W×H×D) | 11.9" x 6.4" x 16.8" (302 mm x 162 mm x 426 mm) |
| Native resolution | 1024 × 768 pixels |
| Supported video standards | PAL, SECAM, NTSC, NTSC‑4.43, PAL‑M, PAL‑N |
| Horizontal sync frequency | 15 ~ 100 kHz |
| Vertical sync frequency | 50 ~ 100 Hz |
| Projection size (diagonal) | 30" to 300" |
| Throw distance | 4.1' ~ 32.8' (1.2 m ~ 10.0 m) |
| Input voltage | 100‑120 V AC or 200‑240 V AC (auto‑select) |
All EIKI LC-XG110 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What safety precautions should be taken regarding the projection lens?
Do not stare directly into the lens as possible eye damage could result, and be especially careful that children do not stare directly into the beam.
From: EIKI LC-XG110/LC-XG210 Multimedia Projector Owner's Instruction Manual
What is the minimum distance required between the projector and a wall or cabinet?
The manual states that a minimum distance of 50cm must be maintained on the sides and rear of the projector.
From: EIKI LC-XG110/LC-XG210 Multimedia Projector Owner's Instruction Manual
How should the projector be placed to ensure proper ventilation?
Keep at least 20 cm clearance on the top, sides and back of the projector and never cover the ventilation openings.
What indicates that the lamp needs to be replaced?
When the lamp‑life indicator turns yellow, replace the lamp immediately and reset the lamp‑counter after replacement.
