Key facts
- Brand
- Delta
- Model
- DVP-01PU
- Category
- Industrial Robot
- Industry
- Industrial
- Documents
- 3
- Languages
- EN · ZH
- Last added
- 2011-11-16
Start here
Delta DVP01PU-H2 Pulse Generation Unit Manual
The DVP01PU-H2 is an open‑type pulse generation unit used for speed or position control of step and servo drive systems, capable of outputting pulses up to 200 kPPS. It features 54 built‑in 16‑bit control registers and supports up to eight extension modules without occupying I/O points.
This manual covers safety warnings, installation in a dust‑ and humidity‑protected enclosure, wiring guidelines, LED indicator functions, I/O terminal specifications, communication settings, and detailed parameter registers. It also includes environmental specifications, error codes, and troubleshooting procedures.
Delta DVP-01PU specifications
| Power supply voltage | 24V DC (-15% ~ +20%) |
|---|---|
| Current consumption | 140 ± 30 mA |
| Maximum output pulse frequency | 200 kPPS |
| Number of control registers | 54 16‑bit registers |
| Maximum connected modules/axes | 8 |
| Operating temperature range | 0 °C ~ 55 °C |
| Storage temperature range | -25 °C ~ 70 °C |
| RS‑485 communication baud rates | 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps |
All Delta DVP-01PU documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the maximum output pulse frequency of the DVP01PU-H2?
The unit can output pulses up to 200 kPPS.
How many extension modules can be connected to the DVP01PU-H2?
Up to eight modules or axes can be connected without using any I/O points.
What safety step must be taken before powering the module?
Turn off the power and do not touch any terminals before applying power.
From: Delta DVP01PU-H Positioning Control Module Installation Guide
How many axes can be connected to the DVP01PU-H?
The module can connect up to 8 axes.
From: Delta DVP01PU-H Positioning Control Module Installation Guide
What is the input power requirement?
The module requires DC24V with a tolerance of –15% to +20% and consumes 140 ± 30 mA.
From: Delta DVP-01PU Positioning Control Module Installation and Operation Manual
How many axes can be connected to the module?
Up to eight axes can be connected.
From: Delta DVP-01PU Positioning Control Module Installation and Operation Manual