Dell 8/4Gbps FC SAN Module Getting Started Guide

The Dell 8/4Gbps FC SAN Module Getting Started Guide introduces the features and characteristics of the module.


Dell 8/4Gbps FC SAN Module Getting Started Guide - cover page
Brand
DELL
Category
Network Switches
Document type
Quick Start Guide
Language
English
Pages
132
File format
PDF
File size
4.1 MB
Published
26 November, 2023
Updated
26 November, 2023
MD5 checksum
C8CECFAE0F0E9FDF8D42BCC7255E0F28

About this manual

This Getting Started Guide is an overview for experienced installers to quickly unpack, install, and configure a Dell 8/4Gbps FC SAN Module. It covers package inspection, removal of protective covers, cabling guidelines, required items, and IP address configuration.

The guide states the module works only in I/O bays B1/B2 and C1/C2 of the Dell M1000e Blade Server Enclosure. It describes setting the IP address through the FC SAN Module CLI, the Blade Server Enclosure CMC CLI, or the CMC GUI, and connecting the module to the Ethernet network after configuration.

What's inside

  • Overview
  • Unpacking and installing the FC SAN Module
  • Cabling guidelines
  • Configuring the FC SAN Module
  • Items required
  • Modify the FC SAN Module IP address
  • Using the FC SAN Module CLI to set the IP address
  • Using the CMC CLI to set the IP address
  • Using the CMC GUI to set the IP address
  • Connecting the FC SAN Module to the Ethernet network

Specifications

Default IP address10.77.77.77
Default Ethernet subnet mask255.255.255.0
Supported I/O baysB1/B2 and C1/C2
Default licensed ports17 and 18
Regulatory model codeM5424-n
Supported enclosureDell M1000e Blade Server Enclosure
Serial console baud rate9600 bits per second

Frequently asked questions

What I/O bays does the Dell 8/4Gbps FC SAN Module support?

It is designed to work only in I/O bays B1/B2 and C1/C2 of the Dell M1000e Blade Server Enclosure.

What is the default IP address of the FC SAN Module?

The default IP address is 10.77.77.77 with an Ethernet subnet mask of 255.255.255.0.

How can I change the FC SAN Module IP address?

You can use the FC SAN Module CLI, the Blade Server Enclosure CMC CLI, or the Blade Server Enclosure CMC GUI.

Which ports are licensed at the factory by default?

Ports 17 and 18 are licensed at the factory by default.

Download PDF (4.1 MB)

More DELL Manuals


View all DELL manuals →